Ibywind Screen Protector For OnePlus 8,with 2Pcs Flexible TPU Film,1Pc Camera Lens Protector,1Pc Backing Carbon Fiber Film [Fingerprint Reader,Easy to install]

Ok so 10 minutes in and this seems to be a premium product. The end result is flawless, almost like having no protector on at all. The touch experience is smooth, the only problem is the on-screen fingerprint detection which takes longer to register now. Certainly for unlocking, you have to keep your finger on the screen for a good 2 seconds whereas without it was instant. Providing bio info for apps seems better though. It's only a minor niggle. The provided instructions were clear and the kit easy to use. The provided frame guide for my OnePlus 8T was slightly too small and kept popping off but that was no problem, I only had to hold it down until I dropped the protector in place. Now for the bubbles. Like others have said you do end up with bubbles or patches that need rubbing clean and the only way seems to be to use the corner of a credit card wrapped in the polishing cloth and rubbing really hard. I ended up bending the corner of my card in the end I was putting so much pressure on but you really do need to disperse the bubbles or patches underneath until they fade away. 5 minutes elbow grease though and result is amazing. Happy so far and I have a spare just in case. There is an additional protector for the camera glass on the back too and also provided is a neat carbon fibre effect film for the entire back. I'm not sure how long this will last because it does wrap up the edges a little bit but it does afford additional protection and means you don't need a case. We'll see how long it lasts but it's good for now. (Edit. 4 days. It's too flimsy and the corners lifted. No real loss)

After I wasted so much money and time for the perfect screen protector that ticked all the boxes and seemed like a big waste of time...and it was a big waste of Time had I not have stumbled up this screen protector. No other one can compare to this. I bought this for my oneplus 8 pro as it has curved edges and an imbedded finger print reader as other protector's would either not let you use the finger print reader correctly and it would not sit properly on the edges...I'm sure we all had the same problem. This protector does it all. It is very easy to apply as it comes with a kit to secure the protector to the phone as you apply it without movement and it's put square on the face of your phone. That easy. Not only that there is a link to watch a video of how to apply it,and you get two protector's in the box with a skin for the back of your phone and.. yes and. .a small protector for my camera hump. Seriously,this is an amazing screen protector and worth every penny. I hope I explained this correctly because this protector is amazing value for money,let's the phone be a phone as it does not take away from the look of your phone except make it look even more slick as you won't even notice it when it's on. Don't look any further,this will be all you need. I bought one again for my son's phone and he was even impressed with it,and so will you. 100%.

I bought this protector after reading the reviews and watching a video of the installation process. The key features are the placement widget that fits into the charging port, the device to squeeze the film and the process of application from the centre. It requires some patience but it is possible to apply without bubbles. The quality of the film appears as good as the factory installed film. I did not have to reset my fingerprint for the sensor either - that continued to work perfectly. The only gripe I have is that my bumper case is pushing on the film slightly at the bottom. This is as likely to be my fault with installation. I suspect I had not fixed the widget well enough and the protector is slightly lower than it should be. Compared to other protectors I have used in the past on other phones, this was a breeze to install. Just give yourself 15 minutes and take your time when installing.

I have just made my second purchase of these screen protectors. They work so well. I've had the first one on well over a year and it still looked great barring a little ding or two to the protector, not my phone. Yesterday, I completely wiped out on the pavement, phone in hand. Checked it out after the fact and it was definitely in worse shape than I was. It was torn in multiple places, dirty, scratched, multiple tears along the edge, but not a scratch on my phone screen. I cannot recommend these enough. I brought more as I've now put the second provided cover on and don't want to be caught out in case I need another one! So easy to install as well. Cannot fault these at all, and after putting it through the paces yesterday, I can definitely recommend.

This is a great idea on how to help easily install. A great kit, clear instructions, and accessories that actually help you align and reduce error. These are the pro's of this kit. For me, purchasing for my OnePlus 8 Pro, I have been let down by using both on the subsequent lifting from edges. The first time went well, I followed instructions and found the installation a breeze. Then about a day later I noticed some of the edges were coming up in the corners in particular and on the curved side. I repeatedly found myself smoothing them down but they reappear in minutes. First time, I blamed myself and said I must not have cleaned those areas well enough. Thankfully, they provide 2 sheets. So I tried a second time. This time, I paid extra attention to cleaning with the wipe those areas thoroughly, drying with the supplied sloth and using the sticky dust remover all over. I followed the procedure exactly as stated (and I would add, I am fairly au fait with these sorts of things in general). It worked well, I really slicked down the edges as well, and it seemed to be stuck down. Great. A day later, the edges start to come up once again, despite being extra careful. As such, for me there is so much potential, but the adhesive lets it down, at least in my experience.

No sirve se hacen burbujas y muy incómoda su instalación

Fácil de colocar con la guía que incluye y buenos protectores.

المنتج خطير وسهل الاستخدام، يركب بالمليميتر وموجد له شرح في اليوتيوب من الشركة نفسها. جودة المنتج عاليه وفاق تصوراتي، الحماية الامامية شفافة جدا وتركيبها احترافي. وتجي معها حماية للوجه الخلفي وزجاج صغير للكاميرات. رائع رائع.

Wow. I was delighted to stumble across a video showing the application process of this TPU screen protector. So I came to Amazon to see if it was sold here and found it and ordered it. I received this SP several days ago but have put off installing it until today because I hate installing SPs and the lousy job I did installing the factory supplied SPs that came (uninstalled) on my OnePlus 8 Pro further discouraged me. I had so many bubbles I couldn't tell which ones had debris under them and which were just air bubbles. Over the course of 2 weeks, all the bubbles gradually disappeared except for 2 that had debris under them. And then one side on the curved edge didn't adhere very well either and was continually bugging me. For whatever reason, I decided today was the day to install this TPU SP and replace the lousy job I did on the OEM SPs. I figured if this new TPU SP didn't work out, I might just have to go without and hope that my OCD would allow an unprotected screen. Using the USB port for a home base for alignment is genius. I cranked up the shower on hot to minimize dust particles, followed the included instructions, and this SP went on perfectly, no bubbles, no misalignment, just perfect. I am delighted with this and can't recommend it enough. I'd give it 6 stars if I could. I only hope it holds up for a long time (but fortunately 2 came in the box). My 3.5 year old OnePlus 3 came with a factory applied SP and it remains on that phone to this day. Sure, it's scratched up some and isn't perfect, but it hasn't curled, no bubbles, and has protected the OP3 screen (encased in a Spigen Rugged Armor case) for over 3 years without issue. I call that value right there. For $10, you cannot go wrong with this TPU SP unless simply must have a TGSP. And from what I've read, those then to only adhere on the edges and leave a slight gap over the screen itself. I don't know if that's a universal issue or was just specific to the feedback I read on one TGSP. Regardless, this TPU SP and the application system it uses is the best I've seen.. especially if you have shaky hands and have trouble with alignments generally speaking. Search out the YT video on this and watch it. Seeing it being applied was helpful to me.

Very easy install and seems good quality. Good price too!