Screw Terminal Block Breakout Shield Module for Arduino MEGA-2560 R3
Thumbnail 1Thumbnail 2Thumbnail 3Thumbnail 4Thumbnail 5Thumbnail 6Thumbnail 7

Screw Terminal Block Breakout Shield Module for Arduino MEGA-2560 R3

4.8/5
产品编号: 243378022
安全交易

细节

  • Item Pitch
    3.5
  • Gauge
    26.0
  • Connector Type
    Screw
  • Number Of Contacts
    18
  • Mounting Type
    PCB Mount
  • Material
    Copper
💡Power LED indicator
🔌3.5mm pitch
⚙️26-16 AWG wire

描述

🔧 Elevate Your Arduino Game!

  • READY TO USE - Soldered and assembled, so you can dive straight into your projects without delay.
  • ROBUST BUILD QUALITY - Crafted with FR-4 fiberglass PCB and dual copper layers for durability.
  • SEAMLESS INTEGRATION - Easily connects to your Arduino MEGA-2560 R3 for hassle-free projects.
  • USER FRIENDLY DESIGN - Includes a power-on LED and a convenient reset button for quick troubleshooting.
  • VERSATILE COMPATIBILITY - Accommodates a wide range of wire sizes (26AWG to 16AWG) for diverse applications.

The Screw Terminal Block Breakout Shield Module for Arduino MEGA-2560 R3 is a pre-assembled, user-friendly module designed for seamless integration with your Arduino projects. Featuring a 3.5mm terminal block pitch, it supports wire sizes from 26AWG to 16AWG and includes essential components like a power-on LED and reset button. Built with durable FR-4 fiberglass PCB and dual copper layers, this module is perfect for both hobbyists and professionals looking to enhance their electronic designs.

Large manufacture image 1Large manufacture image 2Large manufacture image 3Large manufacture image 4Large manufacture image 5

有问题吗?看看别人问了什么

??? What is the 3 pin T0-92 "unknown" used for? It's located above the pic of the breakout module.
What is the 3 pin T0-92 "unknown" used for?

评论

4.8

全部来自已验证的购买

S**E

Love it

This works super well. I was sick of putting jumper ends on wires to hook up the the arduino. Have not had any issues with the terminal screws which hold very tightly. I've accidentally stepped on a wire and it broke on the other end of the wire rather than pulling out of the terminal. There was no damage to the terminal.I really like the additional grounds that are provided.

A**N

Easier to wire many wires

My project used 54 wires. Instead of using jumpers to the pins, I mounted this terminal block on top of arduino. Ow it was much easier to screw the wire into the block and neat installation. Offers maultie ground takeoffs which is very convenient to group common ground.

M**R

Good quality terminals

It might be a case of getting what one pays for. It is not cheap, to state the obvious. The screw terminals are first class and do not need to be pried open like on other boards. They hold the wires of any gage and are labeled clearly with color coding based on function. There are grounds and +5V terminals at each row. The downside is that the pin layout is not the same as the Arduino, one cannot mount a shield on top like other breakout boards, and no room in the middle for components like prototype boards. Most of the time I tend to use a prototype board with a tft screen stacked on top, not an option here. This worked for me on an application that has two remote displays and needed reliable connections.

D**C

It makes wiring SO much easier

I've used a lot of various models of Arduinos, and always find wiring them into the finished product to be a bit of a pain. With this on top of an Arduino Mega, all the pins are exposed with screw clamp terminals to make solid and lasting connections.

G**D

No soldering

I recently built a G1000 using two Arduinos. As you can see from the photos there are a lot of switches, encoders and push buttons. Trying to made solder connections would be a great undertaking. Just in the panel along there are 100 or so solder connections. Just imaging having to do that twice!The terminal board has been a life saver and during the check out phase there were several encoders wired backwards. Easy to made the switch with the terminals vs unsoldering and resoldering the connections. A jewel screwdriver works well and although the terminals are close together it’s way better than the alternative. I did tin the wires to make it easier to terminate the wires.

W**D

Very well engineered, top-quality product

The product is pricey. A top-quality Mega 2560 itself can cost half as much. So you have to wonder about the price. But this product is very well engineered with all the screw connections very clearly labelled. There is a reset button added too as you cannot get to the reset button on the Mega. The screw terminals make it very desirable for use with other electronics products. A screw terminal connection hardly ever fails unlike a wire plugin into a header. The makers have included a 6-pin header-extender so you can reach the 6 ICSP pins on the Mega board. I have had no issues with this product.

D**R

Great fit

Glad I found this for an Arduino project I'm working on. Way more permanent and convenient than a breadboard

N**3

Was hoping male breadboard jumper wire would work, nope

I had hoped that breadboard jumper wire (male) would fit and hold in the screw holes for this product. They don't, and would require a different wire (e.g., bare) end, presumable stiff and of suitable gauge (i.e., "wire size range 26AWG to 16AWG, strip length 5mm", as stated in the description, presumably).

常见问题

TrustPilot

TrustScore 4.5 | 7,300多个评论

Ayesha M.

产品与描述完全相符。对我的购买非常满意。

5天前

Meera L.

交易顺利,产品完好无损地到达。

3 周前

全球购物,通过 Desertcart 享受优惠
物有所值
各种产品的价格具有竞争力
全球购物
为 200 多个国家/地区的 3 亿多购物者提供服务
增强保护
深受全球购物者喜爱的值得信赖的支付方式
客户保证
深受全球购物者喜爱的值得信赖的支付方式。
沙漠车应用程序
随时随地随时随地购物。
HK$463

关税和税费包括

Hong Kong店铺
1
免费退货

30天对于 PRO 会员用户

15天无会员资格

安全交易

TrustPilot

TrustScore 4.5 | 7,300多个评论

Anjali K.

产品质量出色。正是我的工作所需要的。

1 个月前

阿卜杜拉·B.

正品,价格实惠。国际送货也很快!

3 周前

Screw Terminal Block Breakout Shield Module For Arduino Mega 2560 | Desertcart Hong Kong