LuxshieldCar Bumper Protector Set for Volvo XC40 1 (I) 536 I 2017-2024 - Rear Bumper guards for cars, anti scratch, Paint Protection For Sill - Transparent

Feels like a tough quality product went on no issues it’s invisible which is great. Slightly too long but trimmed with a sharp knife so fit’s awesome now

Bought for Volvo XC40 B4 MHEV 2021 Model. Once it has been fitted the film is almost invisible (see photos). My experience:Good:1. Accurately cut to fit the car model rear bumper.2. Really tough so should prove durable.3. Almost invisible.Not quite so good:1. Video is entirely in German and is out of date. The video shows a fitter using a water/washing up liquid mixture whereas the kit comes with two small spray bottles marked 1 and 2. Nothing on the bottles though to tell you which to use and what for, so I guessed. On the box though is a very small diagram in both English and German. It would be helpful if the bottles could be marked 1 - Cleaning and 2 - Positioning.2. With the film being so tough (great!) it is very hard to get the film to fold over the edge of the bumper using the supplied squeegee. The use of my Mark 1 thumb and the supplied microfibre did the job but it was a bit disconcerting at the start.Overall impression is that this is a great product.

This is my third protective strip. Easy to apply (unless it’s really windy - lesson learned!) with all instructions and equipment provided. Put plenty of the spray onto the protection strip and it’ll be easy to manoeuvre into place. The recommended temperature is 18 degrees so I used a hairdryer to prove bit of warmth, which made it more supple and easier to bend over the bumper.A great product, wholeheartedly recommended.

Good product, but expensive especially as there were no instructions in English, I’m happy enough…

Amazing, the kit supplied was of excellent quality, easy to follow instructions, went on easy and doesn't affect the look of the car, blends in nicely. I highly recommend this product.

DO NOT BUY - Damaged my car paint work see photos simply adjusting it pulled my paint work on a brand new XC90 WARNING AVOID THIS PRODUCT

Superb product. When I started the process of fitting I doubted the finish I would achieve. However, it went on brilliant. I reckon around 10 minutes all in but was actually done in 5; I just spent another 5 going over it again to make sure every blemish was out.It actually enhances the colour of my car. The photos are a bit pointless as it’s practically invisible except for the small edge line that I’ve attempted to show in the second photo. I’m so impressed that I’m gonna buy some further protection from them for door handles etc.

Easy to use

I think if the instruction would have been more clear and they would have provided more of the liquid nr 2, this might have worked but because both were not given, it looks like cr**p on my brand new car. I am super mad. No where in the instruction it is written not to install when it is over a certain temperature. I just received the set today and wanted to install it right away. It was over 85 degrees outside but the instruction is just saying don't install when it is too cold, nothing about when is too hot. It even implies that when it is hot, it is better! I followed all the steps but because it was hot, the second fluid evaporated very quickly on the surface of the bumper and there was not enough fluid to keep things wet. I had to rush and it looks really bad. Also the surface is full of scratches. My car is brand new, has less than 50 miles on it and now I have to deal with removing this thing without damaging the paint. If you release a great product, which your product might be, just have a better instruction how to install it and be more specific with certain recommendation. Also add enough of the fluid to install the product and if you don't have space in your package, let people know how to mix something similar.Total waste of money and beyond.......Update after 3 weeks:Ok, even though initially it looked really bad, I just left it on to see what happens. Now after 3 weeks 99% of the bubbles underneath are gone. When the car is washed, you see there are lots of scratches. I guess these scratches got on as I used the sharp side of the scraper (no word in the instruction on to use it). You also can see all the areas where I used a needle to get rid of the bubbles, there are tiny little bumps. It all sounds more dramatic than it is, the product works and overall looks good now. Only when you are OCD like me, you will notice the scratches and bumps.I still think the company should work on improving their instruction and add more installation fluid. If they don't have space for more fluid, let us know how to make our own ( should be possible with ordinary ingredients). Would I buy this again for another car? Now that I know how to avoid the mistakes, YESSummary for tips, which are not in their instruction:- Make sure it is not too hot or too cold when you do the job. Avoid doing the job under direct sun light.- Don't use the sharp side of the scraper, it will severely scratch the surface of the product- Be aware that there is very limited amount of Fluid 2, use it thoughtfully- Try to push the air bubbles out to the sides. If you can't get them out, unless their bigger than the fingernail of your pinky, don't use a needle. After the product is fully set, after 2-3 weeks almost all of them will be gone.

Einfach anzubringen. War in 10 Minuten fertig. Ergebnis top!

Helt rätt storlek och otroligt lätt installation. Viktigt att det är rengjort riktigt noga!

Sincèrement parfait les priduit sont génial, la découpe est parfait

N on è stato facilissimo installare la pellicola, ma alla fine ce l'ho fatta anche grazie all'aiuto del servizio clienti efficientissimo. Prodotto consigliatissimo. Unico consiglio: non esagerate con il liquido per l'installazione