Wall Mount Bracket Junction Box

I needed to mount a Ring Spotlight Cam Pro Wired on a wall with an offset. Note: the Ring Wall Mount is only compatible with their early Ring SpotLight Cam, It is not compatible with the 2025 Ring Wired model.I can attach the the Ring Spotlight Cam Pro Wired baseplate so the camera faces 90 degrees from the wall. I can adjust the camera to perfectly align with the area I wish to cover, a side gate at a height of about 9 feet. The unit is robust and strong. However the wall mount screws and anchors are inadequate in my opinion so I have replaced them with more longer, thicker screws and more substantial wall plug/anchors more suitable for a brick wall.There are cutouts to feed the mains cable through the unit in order to provide a connection into the camera base plate - the cable entry grommet is accessible for my configuration.I have also attached adhesive bird spikes on top to prevent birds sitting and pooping on the installation. I am very happy to have found a good solution as I have similar mounting challenges elsewhere for which Ring does not offer an out of the box solution.

There are lots of junction boxes on the market. This one stands out at is is truly "universal" withplenty of fixing points. I used it to hold my Foscam dome camera. The box is very very solid sturdy metaland comes with a bag of fixings both to attach the camera and attach the box to a wall. It also has plenty of space inside to hold excess wiring and well sized holes ate the rear to lead out cables. It even comes with a drill hole template to help with fixing.If someone attacked the installation it would definitely be the camera that would come off worst.After using this I ordered a second one for my other dome camera. Excellent. Totally recommended.

My package was missing the 3 screws that holds the mounting plate in position but all other screws were in the package, not worth returning as i can get the screws from work. The bracket is robust & seems well made, I have not fitted it yet but no reason to expect it not to be OK.

At the end of a long online search I finally came across this simple mount for my Hikvision turret camera (DS-2CE56H0T-IT3ZE).I was just never happy with attaching the camera directly to the wall. I assumed there would be an abundance of this type of mount converting from a wall mount fixing but seemingly not. Anyway I got lucky with this one as its very well made and was exactly what I was looking for. It will definitely outlast the camera which (after the roofers were in) now unfortunately suffers from water ingress and internal condensation - nothing to do with the roofers who just happened to be working on the guttering directly over the camera😒. That's typical of workmen of course one problem fixed and a new one appears. At least I could install the mount myself and this was a half hour job. Very happy to recommend this product a wee bit pricey but worth it.

Not the greatest looking thing but it does a good job of mounting a vandal resistant camera and it's associated gubbins.

Does not fit a ubiquiti unifi ai 360 camera. Will have to drill it mount it run the cable and seal it with silicone. That might work.

I used this product to install my hik vision done camera and it fitted the camera perfectly. Will definitely be using in future projects.

I have been having issues with bird poo hitting the camera from them sitting on an above wire.I tried a "sun shield" which was just plastic and was £20. This is all metal and cost the same and looks and feels miles better !It now is covering the camera a bit more and moved it forward slightly so time will tell if the bird poo issue gets solved by this hopefully.