🔌 Seal the Deal with Confidence!
The Clear Electronic Grade Silicone is a versatile, one-part RTV silicone sealant/adhesive that offers exceptional protection for electronic materials. With a non-corrosive curing system and a wide temperature range, it is perfect for both production and assembly in confined spaces.
D**L
Amazing stuff. Very low odor
Amazing stuff. Very low odor. Cures nicely. I've been potting and adhering "NeoPixels" (aka WS2812B) display chips with this. Absolutely perfect results.Also cleans off your hands quite nicely with Mineral Spirits. Gloves are better... but if you do get any on your skin...
I**M
Good product!
A little expensive, but did meet my needs for electrical box outdoor coverage. Most other common businesses do not carry such a product.
C**J
Works great for potting delicate connections
I used this to pot a USB connection on a GPS of mine that I had recently soldered and it worked great for the application. I made the repair about two weeks ago and it is still holding well. It adhered to the circuit board properly as well.
M**L
Health First
I had to use about 15 tubes of these over a week for a large project. I chose to use ASI 388 b/c of its very low VOCs as compared to other standard silicones that you can purchase in big box hardware stores. Next time you're in one of those stores, check out the VOC information on the back of the Type 1 and Type 2 silicones and look up the health hazards. Even though this stuff is significantly more expensive, it's way safer to work with. Other features include no odor and about twice the cure time as compared to the standard silicone, which was a benefit for my project. Be well!
O**I
Works great at this computer shop
We purchased this for two different jobs at our computer shop. It works great for our needs repairing computers. However, I didn't realize how big the tube was going to be. Apparently I bought the BIG tube - the size of house repair caulking that requires a caulking gun. I love the product and yes, I have it in a caulking gun to use it.
H**Y
Please include a cap.
Be nice to have a CAP! Not sure why adhesive companies don't include a cap anymore, other than they want your tube to dry up so you buy more? Other than that, a great product. Ended up using a wirenut, and saran wrap to seal it.A lot of silicone to use at one time.As far as the product, great stuff for electronics.
E**G
Great stuff
Used this to secure some capacitors and resistors to an IC board. Cures nicely in 24 hours with no smell. Good adhesion and stays a little rubbery after drying. Opaque clear/while when dry.
A**R
Great stuff
Works great and it has very little odor. I'll definitely use this in the future!
TrustPilot
2 周前
3 周前
