GRAPH FOR CALCULATION Oil volume in the oil pan from 2 to 7 ltrs - 1 can (bottle) for one stage. Treatment scheme by stages 1+1+1 Oil volume in the oil pan from 7 to 10 ltrs - 2 cans (bottles) for one stage. Treatment scheme by stages 2+2+2 APPLICATION MODE The 1st stage: Add Lubricant Composition Suprotec ACTIVE Diesel + to the engine oil 500-1000 km before oil replacement, pour through the oil filling neck (see the graph for calculation), then run the car till the next regular oil replacement (but no less than 500 km). In case of a significant oil contamination (identify by the color of the oil on the dipstick or oil spots on filter paper) start the second stage of treatment immediately. Recommendations (after the 1st Stage): Change oil; Replace oil and air filter. The 2nd stage: Add Suprotec ACTIVE Diesel + to the new engine oil (see the graph), and then run the car in a regular mode till the next oil replacement. The 3rd stage: Add Suprotec ACTIVE Diesel + to the new engine oil (see the graph), and then run the car in a regular mode till the next oil replacement. Important: - Before applying Suprotec ACTIVE Diesel + shake the can thoroughly until natural sediments (active components) are totally dissolved. - Apply Suprotec ACTIVE Diesel + through the regular oil filling neck of the warmed-up engine. - After applying Suprotec ACTIVE Diesel + the engine should work on single turns (at idle) for 5 min. and then run for no less than 20 min. in any mode (regular operation). - At mileage more than 80 000 km use our long-term Suprotec MOTOR FLUSH during the 1st stage 200 km before the oil change. - It is not recommended to apply the Lubricant at existence of mechanical breakages of parts and assemblies. - Suprotec ACTIVE Diesel + is compatible to any type of engine oils and doesn't change their properties.
