Operating the Can Opener Step1 - Place the Can Opener on top of the can with its rim positioned in the groove between the Cutter and the Drive Wheel Step2 - With the can on a flat surface, press the Button for about one second and release, then the Can Opener will start cutting the side of the can Step3 - When the cutting has completed, press the button immediately to reverse the cutter Step4 - Make sure that the cutter resets to the start position and the motor stops. Then, lift the can opener off the can Trouble Shooting 1. If batteries are depleted, the can may not be released by pressing the button. Slide back the Battery Door and replace 2 AA batteries. The Can Opener should continue the cutting. Remember to replace the battery. 2. Cans with heavy seams and uneven rims may stall the Can Opener. If this happens, follow above procedure to release the can. 3. If the can is get stucked, please press the white button on the top of the can opener. Note: 1) Use 2 new batteries ( High quality AA batteries), cheaper less quality new batteries are inadequate and may not preform as necessary. 2) After completely revolving around the can and cutting the edge, the can will still appear to be sealed. After prying up the lid will it be evident that the can and its resealable lid are detached. 15) Do not lift or forcefully remove the can opener from the can while it is operational. Forceful removal can cause damage to the knife-edge.
M**K
worked twice
I purchased this and it worked twice. Now I cannot get it to fit on a can, it is like there isn't enough room to fit the can into the area. Had recommended it to my sisters, but have called them and told them not to bother buying it because it is not worth the price to work twice. I loved it when it worked, but don't like it now. I will be looking for a different product next time.
I**L
Design needs work
This is a neat concept, but you will catch all "heck" to get the battery compartment off. They need a better design. It took me 20 minutes and I was successful by accident; it slipped out of my ands and hit the floor and then the over popped off. Now it works fine, but I dread the day when the battery goes dead....
N**N
Why did I wait so long to buy this?!!
Why did I wait so long to buy this? It’s awesome no more wrist pain from open g several cans and cuts from sharp can edgesIt’s great!
A**R
Doesn't work
The first time I used it it left metal shavings behind and seemed to struggle to move around the can. The second time I used it it ran for a second and seemed to be struggling and then it stopped and was stuck to the can. I had to throw away the opener along with the can it was stuck to.
M**S
Look elsewhere
Absolute garbage, it does not open easily, prongs broke off. 2 different sets of New batteries in it and still GARBAGE!Look elsewhere.
J**.
No!
Just did not work well. Did not cleanly separate lid from can. Pass.
S**B
Could not open battery cover
Have arthritis and could not remove battery cover so I never got to try opener even once. There were no markings on cover showing how to open, and no written or photos showing how to open.
C**Y
Not What I Expected!
Love the idea of no sharp edges but this is lightweight and cheaply made. When we finally got it to work the lid was stuck in the can opener lol. Would not recommend or purchase again.
TrustPilot
1 个月前
2 周前
