The function of each button as follows: M+/ M-: Mode choose key, press the key to switch the mode(22 modes in total). B+/B-: The brightness will brighten/dim when you touch the key(Brightness for dynamic modes and static modes). S+/S-: The speed will up/down when you touch the key(Speed for dynamic modes). Technical Parameters of Panel Controller: -Working temperature: -20-60℃ -Input voltage: 12V-24V -Output: 3 channels -Connecting mode: common anode -Static power consumption: -Output current: 6A (each channel) -Output power: 12V: Technical Parameters of Remote: -Working voltage: 1.5V*3 Emission current: 10 mA Standby current 3Ua Working current: 300Ua Standby time: 6 months Control distance: 30m Color pulley point: 60 Match: To match the remote control to the receiver (You don't need to do this when first out the box). Press"B-" key once when first switched on within 3 seconds. The light will blink 3 times to indicate that the remote control is matched. Warm tips: -Supply voltage of this product is DC 12V-24V. -This product can't overload. -Lead wire should be connected correctly according to typical application diagram. -Before connecting the electricity, ensure no short circuit. The installation location ensure no damp, direct sunlight and higher temperature etc.
