MYPET North States Paws Portable Pet Gate: 26-40" Wide. Pressure Mount. No Tools Needed. Made in USA. Dog Gate 23" Tall, Expandable, Durable Dog Gates for Doorways, Fieldstone Gray

This pet gate is perfect if you have a small dog or medium to large dog that won’t jump over a gate. It is pretty short, I’m 5’4 and it isn’t too difficult for me to step over, anyone taller really wouldn’t have an issue stepping over it. I got this to block my two large huskies from going into our bedroom but I needed one short enough for our cat to jump over it and it’s the perfect height for that! My dogs could EASILY jump it if they wanted to so if your dog will jump dog gates, get a taller one. I specifically picked this gate because it was cheap while still looking nice in our apartment.

Put this in my RV to keep the healers from going through the screen when they see squirrels.

Feels Sturdy, looks like picture, pretty simple to operate.

If you have baseboard molding you will most likely have install the gate above the top of the molding as the bumpers that hold it in place are not thick enough to make up for the thickness of the molding (mine is raised up in the picture - the gap at the bottom will be as big as your molding is tall). So cats or tiny dogs could fit under. You could instead go to the local hardware and find some thicker bumpers to install, trial and error until you find something that works (I'd try the bumpers that go on the bottom of chair legs).If you have read the dimensions, like you should have before buying, then you already know that big dogs could jump over it, so don't complain when that happens.The gate and locking mechanism are plastic if you just put the gate up and push as hard as you can on the locking lever it will break. Instead don't be a moron and take five minutes to see how the mechanism works and how much pressure is required to latch the locking lever. The lever must line up with a grove (you can see the groves on the right side of the mid rail in my picture) and then as you push down the gate expands a little before the lever locks. If you start out with the gate too wide, the lever won't make it all the way down without breaking. Move it back one notch narrower and push the lever down. once the lever get pushed down to the first locking position there are two more that you can push the lever further down to make the gate slightly wider for fine adjustment.Do a test run before you have a pet trying to break out of it, to find the correct adjustment and then mark it with a sharpie for quick easy installation from then on. If you are going to use it in two different locations like I do, then mark it with two different colored sharpies - it's not rocket science folks just a little common sense and pre-planning.Since my dog is big enough that he won't fit under the gate when it is raised above the molding I just rest the gate on the toe of my shoe and snap it in place.I only use it when I am home and don't know that I would trust it to hold up a full day with a smart dog all by himself, but if that is your plan then I would instead spend the additional money for something that could be permanently installed (think metal, bolted in place) the extra cost would be worth the peace of mind.

Purchased for litter of puppies but it was a little flimsy and they would knock it down and it broke

Easy installation. Quality product. Keeps our dog from escaping the house.

I didn’t need a super sturdy gate as will be using this for a small puppy I’m getting in a little over a month.Arrived with a piece broken off and in half. Gate Is what I expected for the price (not great quality or very sturdy-seems ok for small puppy or a cat). When the gate was inserted in the doorway,two of the pressure ”pads” had gaps between them&the inside surfaces in the door opening that they should touch. The upper right&lower left corners both have the gap so only the other 2 corners are “anchored” in place…the gate wobbles quite a bit when pushed on in the corners that aren’t held in place. Forced pieces of heavy-duty cardboard in the two gaps that exist between the gate&the edges of door opening…seems like it’ll hold for a small puppy/dog. I wouldn’t recommend this for a heavier/larger dog, even if it hadn’t been broken & if was held firmly in place.The packing tape on the box was barely attached to it&mangled-almost as if had been opened and re-closed w/the same tape (or the tape was mangled when applied). I heard rattling inside the box when it arrived before opening it and inside, found 2 plastic pieces (in photo) that look exactly like 2 halves of another attached piece that holds the half of the gate in a slot as it slides back & forth to adjust the gate’s width. Wasn’t sure what they did until I put the gate in the door opening-the 2 pieces that were loose in the box clearly used to be one piece that broke in half after breaking off the gate at some point (not sure how,as they wouldn’t have been under any tension when the gate was packed in the box…is no reason that I can imagine for them to break off). If I push perpendicular to the gate on the the sliding portion that the broken piece was meant to help slide more easily, that side pushes away from you as there’s nothing keeping it “engaged” in the slot. (Sorry-is hard to explain). I don’t see a way to repair it and it’s hard for me to return larger packages&wait in lines etc due to chronic health issues so I’ll just keep it and get a better one if I need to.

Great for cats