FanzKo GX390 Ignition Key Switch Box w/Keys Engine Stop On Switch for Honda GX340 GX390 11hp 13hp Gas Engine

exactement ce que j'avais besoin

The ignition switch wire with the eyelet is the power wire that connects to the starter solenoid B+ terminal. (B+ is the same post that the battery positive cable connects to at the starter solenoid)The wire with the female spade terminal is the starter signal wire that slides over the male blade located on the starter solenoid.The two black wires are used for ignition off. You will want one of the two black wires to connect to the Ignition Switches Red wire. the other black wire to connect to the Magneto wire.Does not matter which black wire connects to the red wire. Just so you have one black wire to the red and the other black wire to the magneto.I did not use the separate kill switch that they provided with the assembly. It is not needed, the two black wires are what shuts the engine off when the ignition key is rotated to the off position.

Used to replace the ignition switch on my 420 CC Predator engine. Wires were thin & cheap, and the mounting hole had to be wallowed out to install. Installed November 2022, ignition tumbler broke at the end of January 2023. Removed it and replaced with another brand, which had better quality connections as well.Kinda sad, I was hopeful that this would work well

EASY INSTALL , GOOD PRDUCT

Couldn't figure out the wires so I just started connecting random ones and cranking it till it worked.Fits perfect and is exactly what you need for your 420cc Predator