Window Dryer Vent – The Original Window Vent Kit for Clothes Dryers, 4 Inch Exhaust Hood, Adjustable Side Panels Fit 24-36” Windows, Heavy Duty Metal Design by Vent Works

Wasn't sure what to expect, as the photos just look like cheesy galvanized sheet metal, but the mfg did a thorough job on this product. The edges are almost all folded back on themselves for extra strength and rigidity, plus it eliminates most of the potentially sharp edges. It's a solid, heavy-duty item. Both ends slide out to fit the window frame, which, if you're not using the full length, gives you some flexibility on where you place the vent opening in the window opening, in case it matters. Installation was a breeze, the hardest part being crawling in behind shrubbery to remove the window screen, which on my windows need to be removed from outside. It fits snug and solid, although I'll probably seal the top with a strip of weatherstripping to fill the tiny spaces bugs could get in. It would have been nice to have a 36" strip of sticky-back foam weather strip included, for the price, but no such luck, meaning a trip to Home Depot. And that's maybe the only downside of the product - the price. It's a bit steep, but since I've found nothing similar in style or quality, they get to do that! I had the option of not paying it, of course, and trying something else, but it turns out I'm very happy with my purchase. A well-made product that does its job effectively - can't ask for more than that!

I needed to vent a new dryer I purchased out of a window, I found this product and after using it for two months I find it review worthy. This vent is heavy duty, slides out to fit the window opening and works like a dream, when I have to dry a load of laundry I lift up the window screen and secure it with a clothes pin, put the vent that's attached to a flexible dryer hose into the window, close the window to the top of the vent and turn the dryer on and remove it when I'm done, the vent is made so well I expect it will last for years. I just wish it didn't cost so much but I wouldn't hesitate to buy another one as a gift for someone or recommend it as a great alternative to drilling a permanent vent opening thru a wall. Update; Well it finally happened I put wet clothes into the dryer and lifted the vent to put into the window, my hands were wet and the vent slipped out of my hands falling approximately 40 inches to the tile floor after bouncing off my dryer, the dryer has a small scratch and the tile has a small dent in it but the vent suffered no damage at all and that my fellow reviewers is how well this vent is made.

For 2 years I wanted a dryer for my condo but I am not allowed to cut a hole for a vent. I am allergic to everything so I didn't want to vent a dryer indoors, thinking that the moisture, heat and small particles of lint being vented indoors would make me react. So, for 2 years I researched and never came across the window vent solution! I stumbled across it by mistake and immediately bought this. I bought the NewAir Portable Dryer 3.6 Cubic Feet MiniDryer36W dyer, this window vent, a hose made for dyers (the others are flammable) and silver dryer tape. Because this takes a 4 inch hose but the dryer takes a 3 inch hose, I also had to buy an adapter that would allow me to connect a 4 inch hose to both. It works GREAT!!! The best part is that i can stick it in the window when I am using it and take it out when I am not using it...so no one can say anything about me leaving anything permanent in the window. I also want to say that I am not handy AT ALL. And I was able to set everything up within minutes. it is really good quality also. I am extremely happy with this!!

I ordered this to use in my lake cabin, as there was no external dryer vent installed when they built the house. Needing what I thought would be a temporary solution, I found this Vent Works product and decided to give it a try...boy am I glad I did. The item arrived when expected, and I could immediately tell it was of very high quality. I must admit that I was expecting something relatively flimsy, however, this is substantial and heavy duty. I opened the window, removed the screen and inserted the window vent. Then I connected the vent duct and I was ready to go. Literally took less than 30 seconds to install. We like to keep the window closed when we're not using the dryer, and because it is so easy to install into the window frame, we put it in each time we use the dryer. In conclusion, what I thought would be a temporary solution, has impressed me so much, it will now be by permanent solution. Money well spent and kudos to Vent Works for creating such an impressive and easy to use product, made in the USA!!!

Moved washer and dryer from the basement to a 2nd floor bedroom which was converted into a laundry room in 2021. Have been using an indoor dryer vent kit (bucket type with water in it) in combination with ceiling exhaust vent, dehumidifier, and opening a window. Dryer use generates so much humidity that wood trim in the room becomes wet very quickly especially if the measures mentioned previously are not done. Contemplated having a hole bored in the side of the house to vent the dryer outdoors. Relative mentioned that dryer vents exist which can be placed in a window. Compared features of others and selected Vent Works because of the material and ease of taking it in and out of the window. Plan on leaving it installed throughout most of the year except for Winter when it will be taken in and out. Used for 1st time today, and thought that it would eliminate the need for the dehumidifier. Had dryer on a few minutes when a stand alone guage showed humidity 67% and climbing so then the dehumidifier was turned on. Oh well I'm still impressed with the vent even if it doesn't eliminate the need for the dehumidifier. It did keep the temp in the room from rising as high as it used to go when not venting out of the window. I highly recommend this Vent Works vent.