Yaheetech 18 Inch Tall Metal Bed Frame Queen Platform Bed Frame with Storage Space,Sturdy Slat Support,Easy Assembly,No Box Spring Needed,Black

This bed frame is great choice for use as kids bed, guest room or for anyone who is keeping their surroundings simple. It took an hour to assemble it and went together smoothly. It's very sturdy and is elevated enough to allow storage underneath it. A headboard can be attached if desired. Great item!

Let me start off by saying I did not intend to keep this for like, long term use. I just needed something tall to get my mattress off the ground and I didn’t care what shape that took as long as I didn’t have to see it. However, now that I’ve had this bed for almost a year, I honestly don’t think I’d get rid of it. I’ve realized I prefer beds that aren’t as tall but that’s a personal preference and nothing to do with the bed frame itself. That aside, it really is a great frame. It’ll give you height if that’s what you’re looking for, it doesn’t squeak (and neither my partner or I are tiny folks) so that’s incredible, it’s ridiculously sturdy, and most importantly in my opinion - it was super easy to put together by myself. It came with instructions that were easy to follow, and all the tools needed. I’ll honestly probably end up keeping this and just sticking a headboard on to it because it does in fact have holes so I could mount one to it. Overall a great purchase, though I would love it if it had slightly better supports to stop the mattress from sliding but you’ll likely get that with any bed frame

Great mattress base set. It comes in to sets that u can snap together. Ot was very easy to assemble. Easy to pull from box and put together. Looks great when put together. I love that it has space under the bottom for storage.

The frame is well design. very sturdy, with 6 pre-drilled holes for the purpose of installing headboard if you want. It is super cheap, no annoying noise. Tools are all provided. I like it. The cons is the assembly. There are quite a lot of screws, different types, about 25 of them. I don't know if the other bed frames are the same. However, the instruction is quite clear, just follow step by step. Be careful with the correct directions of the parts. You might need some WD40 to help you.

Really was nice and sturdy. I recommend highly

As shown in the photos, the product comes with rails attached to legs that unfold, and only in one direction. Assembly was very straight forward. However, I received a defective part with the slots for the slats UPSIDE DOWN on one of the rails. It’s quite literally attached to the leg and does not come off to be reassembled correctly. Emailed their customer service and they told me to REVIEW AND FOLLOW ASSEMBLY INSTRUCTIONS. After I sent them photos of the defective part. Meaning you either didn’t read, didn’t understand, or simply didn’t care and sent me a generic nonsense reply that does nothing to resolve the issue. The slats support the bed, and if they can’t rest in the slots on one side of the rail, there’s nothing to support the bed on one side rendering the product useless. I shouldn’t have to explain how the product works to the manufacturer. Save your time and money, get something from a more legitimate manufacturer that values customer service.

I bought a smaller version of a all metal frame/foundation for myself years back and decided its time for my mother to get one too. I got this one so its higher up and is easier on her legs to get in and out of bed. Also her old frame was one of those fold up 2 piece frames with wheels, hers was bending and shifting the bed around. The frame was an absolute nightmare for us to put together, the instructions to not specify which way is IN or OUT or UP or DOWN it just shows "Part A connects to B" type of diagram. Ive had to take apart 2 pieces and swap them around because of this as it is built differently then mine which i ordered years prior. They give you a align wrench and a makeshift metal tube socket wrench with a pipe you insert into the center and use it to turn. Why do none of these products give you a hex-drill bit? I ended up ordering a 30 piece hex-bit set after this because it took us FOUR HOURS to put it together... The welds on the top and bottom covers for the legs only have 4 weld points in the center of each side. Making the welds break apart when your screwing in the bolts tightly. The threads do not have a point where the bolt reaches its fully tightened state so you can just keep twisting until it feels tight enough. 2 welds popped for me, but this isnt going to affect the use of it so its fine. The support beams/poles (8 of them, 4 on top 4 on bottom) do not screw in, they just set down into the anchor points. Even though the anchor points DO HAVE A HOLE for a screw or bolt, the instructions and poles do not have any screws, holes, or instructions to do so. So if you tried completing this frame and tilted it sideways to move all 8 of these poles would fall out. This frame cannot be bent, folded, or compactly stored in any way after assembly. The frame i bought is able to do all of this, the legs fold down, and the frame folds in half if we want to move it around. Seems to work good with foam mattresses. A 12 inch mattress was used with this.

This bed frame is sturdy but it was difficult to assemble compared to other metal frames I have ordered. I bought the 18 inch frame and that was a mistake, thats on me, it is too high probably, I am getting a smaller mattress to compensate. This frame also does not attach to my headboard when other frames have.

Decent frame for the price and it also depends on what you’re looking for. Needed a bed frame for a spare bedroom that wasn’t too big or expensive and flashy so I gave this a try. Easy to put together but lots of nuts bolt etc. took about an hour. As for the frame, it is sturdy and minimalistic, lots of room for storage underneath. Was a little bit taller than expected but I bought a skirt to cover it up. For the price, really good product and sturdy. A+

I've been using it for a little over a week! No problems at all with it. The delivery of the package could of bene better (they dropped it off at the wrong entrance at my apartment building, should have placed it at the entrance near the elevator). It's 80lbs and I had to lift and put it back down a million times to get it to my apartment. Assembly was pretty easy, instructions were clear. I just needed help holding up two pieces while tightening, besides that, I was able to do it myself. My old bed frame would creek everything I moved in bed so this is much nicer. Love the space for under the bed too!

Très bien construit, solide avec beaucoup d'espace sous le lit pour du rangement. Petit point, assemblage seul un peu plus difficile, mieux à deux.

Love this bed. The bed arrived in perfect condition with all necessary hardware. It was relatively easy to assemble, and is very sturdy. The extra under bed storage is exactly what I was looking for. An added bonus is that this bed will accommodate my headboard, though I will need to purchase longer bolts to attach the headboard.

I bought this in July, assembled it in August, three month later is is falling apart. All of the screw holes are bent and unable to be tightened so the bed has no capacity to carry a mattress without bending. I have a similar frame from a different maker that has taken everything I've thrown at it for two years and it is still solid as a rock