🔥 Seal the heat, not your style!
This 72-inch self-adhesive flat gasket tape, crafted from graphite-impregnated fiberglass, offers superior heat resistance up to 1100°F. Designed for easy installation without additional sealants, its gray color matches wood ash for a clean look while providing a durable, tight-knit seal for stoves and fireplaces.
| Item Thickness | 0.13 Inches |
| Material Type | fiberglass |
| Shape | Rectangular |
| Color | Gray |
S**2
Good gasket
Good gasket, works well, easy to use and set up. Not a bad price either. Will definitely keep your temps locked in and smoker.
M**K
Easy to apply
Worked great, the backing is very sticky, easy to apply
D**Y
Works Very Well
Did a Great Job replacing my ovens missing door liner, Works Well and Sticks Well
N**N
Good as new.
Worked great!
J**S
Finally nice and toasty
I replaced the seal around the door but the fire was still burning too fast/hot in our wood insert. I pulled the door and inspected around the glass. The seal looked rather flat and likely needed to be replace...yep it was toast.I wasn't 100% sure this was the right stuff to use, but affordable enough to give it a go. Being 1 inch wide I started on the edge of the glass then folded over on the front and back. The tape is sticky and 'burns' in place, although we had a couple spots on the inside of the glass that did not attach perfectly.However the edge and exterior of the glass sealed perfectly. With the exterior and edges now sealed, my fire burns nice and slow, and I would say we are nearly doubling our burn times for wood. Love that low slow burn heat it gives off (cats love it too). I can add a couple of logs at bed time and wake up to a warm house in the morning.
V**A
Easy to Work With
This self adhesive gasket was really easy to work with. I needed to replace the gasket around my stove window. I removed the window, cleaned it up and starting at the bottom middle of the window, pressed the gasket around the edge. It was nice and sticky. so once placed it didn't move unless I pushed on it, trying to keep the edge even all the way around the window. It was just the right thickness to put back into the door and create a nice seal against the door frame.
P**L
Works well
Worked well, on flu evacuator blower motor on my boiler furnace..
C**E
TOXIC SMELL
TOXIC SMELL I replaced the glass in my woodstive and used this. When you cut a 12 inch piece and pull the tape it shrinks a half inch. You can stretch it as you stick it down but the adhesive is weak, barely sticks to glass worse on cast iron. Assembly went fast and easy, the problem started with the toxic off gassing. Windows wide open for hours... BAD. After 5 days it burned off and the tempered glass shattered. There may be a use for this but it was a disaster in my application.
