Encell Set of 3 Push Button Lock for RV Motorhome Boat Cabinets

No real directions it’s sort of a hit an miss installation. These look identical to others I bought a few months ago but work much better. The trick is to get the latch in exactly the right place so it works smoothly. It helps to be able the adjust the height of the striker plate so it just catches if you don’t it’s almost impossible to open them. Less is more in this case and the push button will lock them in place afterwards. Overpriced for sure (worth about $5 each tops) but they look good and do the job.

Was correct in description giving measurements being able to make sure it the right size

So far these have been working great. I prefer cabinets with no handles, but in an RV or boat, drawers and doors often open during a turn. The positive lock on these help stop that action.I did not give it 5 stars for a couple of reasons:1) These were shipped very quickly (a plus), but come with zero installation instructions (a minus)2) These come complete with screws needed (a plus), but the screws are low quality and strip easily (a minus)3) Unlike attach-n-use latches, these require the use of a hole saw for installation. (A 25mm Forstner bit for the door/drawer front hole works nicely.)And a few more items for information:Product is manufactured in China. Measurements can be found on-line elsewhere, but all are in metric. (see photo)Depending on the drawer/door design, adjustments may have to be made for the distance between the body of the latch and the receiver part...for the latch to actually catch and lock.Adjustments must also be made for a thicker door or drawer.In the case of drawer fronts attached to the drawer box itself, space must be routered in order to allow the locking pieces to fit. (see photo)

Purchased these latches to replace some latches in my 2017 Roadtrek Zion that had become broken. They are not an exact replacement but will work with slight modification. They appear to be a more robust latch than what came with the van.

One pulled apart on assembly. The stakes that hold the back plate in place were not swagged correctly and backplate immediately came loose.The push-push mechanism on the 2nd part does not work correctly. It does not stay in the seated position. Pushing many times it will eventually catch, but then does not release easily. Once you close the cabinet, it would be very difficult to release the button.The 3rd one worked. It initially jammed on closure, but after cycling the button a few times it seems to be working.I would return, but I only needed one. It is unfortunate that I had to use all three to get one that seems to work.

The latches feel heavy, knob is chrome and body is plastic. The depressed knob would constantly either not depress and sit flush or would not depress and release. Cool looking latch but probably not for any high end build.

Easy to install and does the job. No more cabinet doors popping open.

The small stops are weak. They tend to break when stressed. It would be nice to have that part available separate from the latch. I've had both parts break over time and would probably have selected a different more robust lock for cabinets in the RV but these are the ones that the manufacturer installed.