Legrand – OnQ in-Wall Cable Management Kit for Power & Low Voltage Cords – Hides TV or Display Cables Retrofit Behind The Wall – UL Listed TV Cord Hider w/DIY Install & Included Hardware – HT2102WHV1

This kit is simple and complete for wall mounted TVs, would fit most needs behind your TV. It is made with quality and great finish, comes with the high voltage box, a regular 15 amps/125 volts two outlet (careful, the picture shows one with a let, that is not what comes with it), decorative cap for the outlets with the screws, and it is recessed to provide some in-wall space for the power cord male plugs.In the other side, the white brushes are not too soft or too stiff, perfect to stay on place to cover the hole while allows to pass any cable(s) to communicate with your TV (I ran 2 HDMI and one audio stereo cable for additional A/V IR remote control). Behind the brushes, it has small plastic structure that helps to hold/support the cables, so they won't get lose or fell inside the wall easily. Additional, it allows to hide the extra cable inside the wall.It is easy and simple to install, the instructions are written inside the box, as well as the cut out template.If you want your super flat panel very close to the wall to looks like a hanging frame picture, this box would allow you to do that also.About price, this option would help you to avoid the hassle of many individual parts adding cost + S&H. One kit at good price, one shipment.Don't think it more if you are mostly running HDMI cables and power cables. You would be happy |:-)

Love these. great way to get rid of hanging wires! Easy install .

Helped clear out our wires completely. Very easy to install, great quality and looks super elegant.

Perfect for behind our 75" TV. Easy to install. It will fit any size sheetrock thickness as well. Just make sure to use the template THAT'S ON THE INSIDE OF THE BOX. Don't believe the reviews that say the template wasn't included. IT'S THERE! Look on the inside of the box the unit comes in. Yes, you have to cut it out from the box, but what else are you going to do with the box besides throw it away. I'd say it was kind of spendy for a plastic box, but I couldn't find a better alternative and it does what we need. Would buy again.

Used this for my newly mounted TV. I was back and forth on this kind of product with a hardwired outlet or the one with an in-wall rated "extension" cable that plugs into another outlet.Obviously, I went with this one. The kit itself has everything you need to install this (template, outlet, etc) but does not include any electrical wire such as romex. I was fortunate to have an outlet high up on the wall between the two studs I wanted to place this new recessed outlet. All I had to do was remove that old outlet, pull the romex down to the new location, and install everything.The romex pulled through the new gang box with ease and connected just fine to the new outlet. I used some fiberglass rods to pull my HDMI and CAT6e cable up from the bottom of my wall (which I also used a Legrand brushed cover to match the top). If you're looking for some cheap fiberglass rods, Harbor Freight has decent quality ones that should do the job for this pretty easily.Once everything was pulled, I tightened the screws on the front of the plate and the entire recessed portion felt very secure on the wall. Highly recommended, just be sure you know what you're doing with the electrical wires or hire an electrician!

Some electrical knowledge is needed to install this product, as you area dealing with outlets, electrical wiring, electricity, etc.This product was a really great buy. It was actually slightly larger than I expected from just quickly looking over the pictures. Not in a bad way, just surprised me a bit.Installation:I had an outlet across from a stud on the floor level that I connected this outlet to with a 12 gauge electrical wire (see this product here: https://www.amazon.com/Southwire-28828226-SIMpull-residential-electrical/dp/B0069F4CXQ/ref=sr_1_1?dchild=1&qid=1589815776&refinements=p_n_feature_two_browse-bin%3A6426161011&s=lamps-light&sr=1-1)Knowledge on how to link two outlets, the safety and fire code for electrical outlet wiring, knowledge on drilling through studs and cutting through drywall is needed. I highly recommend you do your homework on installing these things before buying.All-in-All, this was a 4-hour including a trip to home depot and lowes to get the right wiring and electrical tools for the job, some patch to repair the drywall (needed to put in another hole to run the cable), texture, and paint.(The picture does not show the painted section just yet) but it sits flush in the wall, it's durable, and it provides electricity to the TV while hiding the cables. It was a great buy.

I wanted to hide the wires from the big screen so they weren't hanging down. This worked perfectly. I just needed to locate it above the outlet below (and behind the TV so it was hidden) so I could feed the wires down through the same cavity and connect it to the same circuit as the outlet below it. Works great and now I don't have the unsightly wires hanging down below my TV

We replaced our wall mounted TV. The old TV has cables tucked away but the look wasn't really as clean as I would like. Installing the Legrand - OnQ wall cable concealer was the perfect solution. I added a cable management wall plate behind the TV consul. The cables are gone and the look is clean and professional as I like it. I have one request Legrand should consider. Instead of selling the wall cable box with a standard outlet, include a surge suppressor outlet. I had to basically throw the outlet away so I could replace it with a surge suppress outlet. Not a big deal but it would be nice to have everything I needed included.