🚗 Elevate Your Drive with Style!
The NRG Innovations SWS-100CG Steering Wheel Screw Kit features a stunning chrome gold conical design, engineered for performance and aesthetics. With its patented short hub and unique dual spring self-indexing quick release, this kit ensures a perfect fit and easy installation, all while maintaining close-to-stock dimensions. Compact and stylish, it's the ultimate upgrade for any steering wheel enthusiast.
R**S
Excellent set of dies
Works well for all that I have attempted with it. 40 AND 10MM
G**E
Legend Expander die
For the money,they are a good die set, the only thing I didn't care much for is the expander die, tip is very blunt and being a straight wall case if you don't have your case perfectly centered you'll crush your case. I use a lee expanding die, due to crushing 5 cases.
R**S
4 die set
exactly as described and actually showed up earlier than expected.
M**I
Four die set from Hornady
This is a good set of dies for the .450 Bushmaster. The box contains a full length resizing/decapping die, an expander die, a seating die and a taper crimp die. The dies also come with Hornady Sure-Loc die locking rings which are the best on the market. I've upgraded every die I own (more than 100) with Hornady Sure-Loc rings. The instructions don't mention the taper crimp die at all but set up for that die is easy. Start with the die backed out all the way, place a loaded round in the shell holder, raise the ram, lower the die to make contact with the case mouth, lower the ram a small amount and screw the die down in small steps until you have the desired crimp, then lock the die in place.These dies are more expensive at Midway where they're usually out of stock and Midway charges more for shipping. Well done Amazon!! One more bonus is that Hornady is offering 100 bullets with the purchase of this die set. The bullets have already shipped just a couple of weeks after mailing in the offer.
B**S
it's Hornday you get what you pay for
Great you get what you pay for. I've leaned the hard way to pay a little more for Hornady. I've only had one problem with a Hornady die called them and they sent a new die the same day. and it was when I first started reloading so guessing it was my fault not the die. Hornday will stand by what they sell. unlike Lee
G**E
Works
Works
R**E
Dies worked great. Never reloaded a straight wall case before but ...
Dies worked great. Never reloaded a straight wall case before but it went pretty well. The gripe I have is one of the four dies isn't explained in the directions and I don't know what it's for exactly. It might be for crimping but the bullet seater already does that.
B**N
Four Stars
The only problem is you have to buy shell guide separate
A**N
Awful quality control
2 screws were usable. 4 had rounded heads. Awful
TrustPilot
4天前
1 个月前
