Anycubic Kobra, Auto Leveling 3D Printers with 25 Point Precise Leveling and Self Developed Direct Extruder Compatible with PLA/ABS/PETG/TPU Flexible Filament 8.7''x8.7''x9.84''

if your debating on buying this printer, stop debating and buy it. this printer is absolutely amazing. i have had other printers and this one is by far my new favorite and I will be buying the bigger version of this printer very soon. out of the box putting this printer together only took me about fifteen minuets. super easy to put together. once the printer was put together I proceeded to level the bed. the automatic bed leveling made this so easy. with a push of a button I was leveled and ready to set my z-offset. which was also really easy to do. right out of the box this printer was putting down some really good prints with very little adjustment. by very little adjustments I mean literally just one adjust meant of the z off set. I have bought more expensive printers that took way more to set up and did not give good prints out of the box like this one did. this printer is very capable of printing just about anything. I will 100% be buying another one of this brand and I will recommend this printer to any one no matter the skill set. this printer is perfect for any one from a beginner to the most advanced enthusiasts. good job anycubic for knocking this out of the park.

I really wish I could give this product 5 stars. My last printer the Voxellab one is a disaster. I ordered this conbra, and I cannot express my excitement when the first large print job is complete. The precision is a little off, but over all it is fantastic. It also does pretty well fast mode. However, the extruder broke after a week if use, possibily a clog within the black box or the metal mouth disformed.Anyways, after long and tedious diagnosis, no avail. I orderes a replacement since I am on prime. After assembly, not only does the replacement looks old, which is fine for me, the sensor on the board is simply broken, the it wouldnt move past half the y axis. Lucky my old one is not returned it, I unpack the old one, and since only the extruder was broken, I reassembled the old base with the new extruder top. It went back working! The only thing is that the base makes a very loud noise when starting up, which shouldnt be there. Anyways, as long as it works, no complaints. Hopefully it last longer this time!UpdateSo after thr new extruder, it cloged twice in a day. The first time I am able to poke it through. The second time, neighter poking from the above or bottom works. I set aside two hours in attempt of opening the extruder. This is a disadvantage of direct drives(the spinner and tip in the same box). Neither the less, after half an hour, I opened that thing, which has three layers and around 7 nessessary screws. I found that there is a super thick filament that is so dense at the bottom of the extruder but above the heather that does not melt. That is causing the clog.The lesson is, dont expect user friendly experience when coming to 3D printing. Be patient and expect a lot of time trouble shooting.Update:After a lot of trouble shooting and fixing, the printer works fine for a week in now, abeit the very strange/loud noise starting up. Anyways, I am a happy custumer now. My experience is that, even auto leveling cannot be perfect, and make sure that the z offset be so that the nozzle barly scratches the paper. Even if the first layer has spots where lines are not stick together, that is fine and just bare with it. Otherwise some other spots will be too close and clog the machine.

I bought this printer to supplement my aging ender 3v2 which has always given me issues here and there, so this thing gets to my house and 20 minutes later I'm printing my first parts on this and let me tell you that I was very impressed! Magnetic print bed, outstanding Print quality, ease of setup, ease of use, and the auto level function all come together in this heavy hitting budget friendly 3D printer, I'm IN LOVE! I may buy another one soon to completely replace my ender 3v2!!!

The media could not be loaded.  When I bought this printer it sat in the box for about a month before I got around to putting it together. Everything was well packaged and set up was super easy, I was able to start printing ting right away. I had been printing small things for about a week and a half trying to get all the setting worked out. On my first large print 7 hrs plus I got a Hotend error in the middle of my print(ruined my print) I reached out to anycubic about this issue. They decided that my hotend was faulty and sent me a new one. The new one arrived, I installed it but this new one produces white smoke where the wires meet with the hotend. Right now I'm sitting at 1 star cause I never got to actually test it out before it broke (not even one full month of use).

Excelente impresora para principiantes en 15 minutos ya estas imprimiendo.

Update: Al imprimir con mucho movimiento tiempo en el eje X, se para y muestra el mensaje Hot end Heater abnormal impidiendo la impresión.Es muy rápido su armado y configuración inicial, me gustó lo fácil que es calibrarla.

EN EL EJE Y NUNCA PUDE CENTRARLO (INTENTE APAGAR Y CENTRARLO MANUAL), SI LO LOGRABA CENTRAR YA SEA QUE EN EL AUTONIVELACION SE DESCENTRABA O CUANDO IMPRIMIA, LOS MENUS TIENEN POCAS OPCIONES DE MODIFICAR LOS EJES.