Will this work on a c5 corvette ?

Well, yes but. It's REALLY tight in there, up against the fuse box. Figure on cursing and scraped knuckles. You can't swing a wrench and a socket won't fit in there. I pulled the battery loose, first attached the - cable to the switch, then attached using the long bolt and my fingers. Finished up with a very short wrench from my toolbox. A real pain but the switch seems to work well and makes disconnecting a breeze.

Why does it have to be connected to the negative terminal and not the positive terminal?

That's ok, positive or negative can be connected. We recommend to install this cut off switches on the negative, not the positive, because lower current in negative, will be more safety. The switch can be install in the negative/positive wire, another short battery cable or cut existing cable and attach terminals on each end.

Will this fit a duralast gold 101-dlg? cadillac 2007 sts.

i bought it for 1977 corvette and it fit I am sure it will fit your sts.

Does this disconnect work on newer model cars

1. you will need about a 3" space next to the negative terminal in order to have room to install this switch. 2. depending on the vehicle you will need clearance for the "knife" to be up in order to close the hood, or it could be installed so it opens to the side if there is enough room there. 3. disconnecting the battery may require radio code for the radio to operate again after removing the power. Other functions may be affected too like the clock, possibly other functions as well 4. you will need the proper tool to tighten the bolt to the battery otherwise it will move about as you operate the switch. I am using this on a full size chevy snow plow yard truck (off road only) with plenty of room and I don't need the clock, that one does not need radio codes after disconnection. Look at the pictures carefully to decide if it will fit on your vehicle, if it fits, it will work.

ASIN	B07JYDY7FQ
Actuator Type	Rotary
Best Sellers Rank	#188,169 in Sports, Fitness & Outdoors ( See Top 100 in Sports, Fitness & Outdoors ) #127 in Electrical Equipment Battery Switches
Brand	Ampper
Circuit Type	1-way
Colour	Knife Blade
Connectivity Protocol	Wi-Fi
Connector Type	Bolt
Contact Material	Brass
Contact Type	Normally Open
Control Method	Touch
Controller Type	Push Button
Current Rating	200 Amps
Customer Reviews	4.6 4.6 out of 5 stars (4,433)
Date First Available	2 March 2020
Exterior	metal
International Protection Rating	IP65
Item Dimensions LxWxH	7 x 9.5 x 7.5 Centimeters
Item Weight	241 g
Item dimensions L x W x H	7 x 9.5 x 7.5 Centimeters
Item part number	Am-CBSKB02
Manufacturer	Ampper
Manufacturer Part Number	Am-CBSKB02
Model	Am-CBSKB02
Net Quantity	1 Count
Number of Items	1
Number of Positions	2
Operating Voltage	24 Volts
Operation Mode	Off
Product Dimensions	7.01 x 9.5 x 7.49 cm; 240.97 g
Size	Battery Switch
Special Features	disconnects the battery safely, eliminate any power draw from the battery when vehicle or boat is not in use, isolate and secure the electrical system, used for car battery systems, used for side post
Terminal	Blade
Volume	500 Cubic Centimetres

Side Post Battery Disconnect Switch 12V 24V, Ampper Knife Blade Battery Switch Disconnect Power Cut Shut Off for Car Boat RV ATV (with Long Bolt)

细节

描述

规格

评论

常见问题