Firstly, clean the nonporous tile wall surface or mirror and make sure it is dry; Peel off the protective film of the sticky pad and affix the sticky pad to the wall along the UP arrow then press inwardly to squeeze out the air. Leave it on wall for 24 hours so the sticker could cure. Follow this direction so the dispenser won't fall off from the wall. Method 1: Take down the front cover by nipping the buckles on both sides and slide the toothpaste holder onto the hangers through the back slots; Screw the toothpaste tube into the inlet of the pump, keep it tightly loaded; Lining with the back cover and close the front cover. Method 2: Take out the whole pump out to screw in the tube, then just slide the whole pump with tube back into the holder Push the trigger with toothbrush and release slowly so glob won't end up everywhere. For first use, pls patiently pump it for a few times to empty the air then it is ready to dispense. If the pump doesn't dispense properly, please check if the tube is loaded tightly. RC toothpaste dispenser prevents the bathroom vanity from becoming a cesspool of excess toothpaste. Hang your tooth brushes neatly on the brush holder instead of pile up all over the counter top. Kids don't need to look for their brushes every morning.
