Permatex® Plastic Tank Repair Kit

As listed

Excellent product! Fixed my Angel Fish's tank. Very easy to use. Also figured out how to multi-task this product when a patch on my Uniform got loose on one end. I did not have access to a sewing machine, and this actually fixed my patch from hangin off! It even held going through the washing machine.

The product does not give you enough time to set it properly. If you follow the instructions and mix the two pouches together. The heat from the product is a bit uncomfortable for your hands and while trying to apply it properly it will get hard in the pouch and set wherever you have applied it. This doesn't give you much time to properly distribute it over your area and seal it. This might be a fantastic product overall but it is hard to find out when you are not able to apply it properly. As far as performance I am not there yet. Maybe if I can find a way to apply it properly then I can see how well it performs and the quality on

This seemed to work well, and repaired the 140 gallon tank rock solid, but be advised when they say that after mixing the epoxy - that it can get hot. They don't mean hot, they mean HOT and it WILL burn your fingers if you aren't careful. The chemical reaction works fast, so plan on spreading it all out within 60-90 seconds. After that, the bag of the remaining mix will be too hot to even touch, so put it on a paper plate that you can just toss afterwards. I also feel they could give you more epoxy because I felt I was about 10% low. But overall the repair went well, and no leaks at this point in the tank. Highly recommended.

Used this product on my 1999 3.8L V6 Ford Mustang washer fluid reservoir that was in somewhat rough shape with a long crack. Followed the instructions throughly and managed to seal and fix the crack with the provided contents. Additionally, I did buy extra clear epoxy to create another layer of protection while covering it with Saran Wrap and leaving it to cure overnight which definitely helped. Currently, no leaks!

The instructions specifically state that you have 8 minutes once you've introduced both parts of the epoxy to each other. I kneaded the two together within the package like instructed, until completely mixed, maybe 20 seconds. Cut off a corner of the packet and spread the epoxy on the tank, maybe another 20 seconds. I then put the mesh on top of the spread epoxy and then spread the epoxy on top of the mesh, covering it and brushing it in. Within about 30 seconds, the packet was VERY HOT and already solidifying in clumps inside the packet. I tried to push out any residual that hadn't hardened to save this repair but the epoxy was already stringy and hardened. There was literally no way for me to do this any faster than I did. 8 Minutes would have been more than sufficient to accomplish this repair. Unfortunately, this product hardens in around 2 minutes from the time you mix the 2 part epoxy together. Either I got a defective batch or this product simply doesn't live up to it's claims. Either way, don't waste your money.

Kinda like a bike tire kit but for plastic.

This kit was great. I had a small hole in one of my 55 gallon plastic drums that I use to store emergency water. The instructions were easy to follow and everything needed was included in the kit. I repaired the hole per the instructions and a month or so later the barrel is holding water just fine. Saved me from having to buy another $100 water drum since the hole was at the bottom.

👍

Ok

Product specification says not for fuel tanks only. But it does not mention,from the small prints in the manual: NOT FOR POLYETHYLENE OR POLYPROPYLENE. Because 90% of watertanks and tubes are made from this. So product is useless!

buen producto ya lo use y quedo bastante bien

Needed it for a quick repair on RV tank, the whole box I bought was just about the same price as a single package I could have purchased locally. It made a quality repair!