Metra Electronics 82-8148 6" to 6-3/4" Speaker Adapter for Select Toyota/Lexus/Scion 1998-Up Vehicles, Black

Perfect fit for my 6.5" Kicker DSC650 speakers. The ring mounts matched perfectly with the factory holes on my 2023 Rav-4 which made the installation hassle free. Also added the NVX XBAF65 2 Piece 6.5" Weatherproof Silicone Rubber Speaker Baffle Kit. Speaker mounted perfectly and the mounting ring keeps everything secure. Strongly recommend mounting the ring screws with Loctite or nylon lock nuts to prevent the ring from vibrating loose.

fit 2025 tacoma. had to cut the center pieces out since i got 6.75 in , which i think is the intent? I used a multi-tool to cut the holes out. fit like a glove after that.for that year of tacoma, this is only fro the rear. you need a different adapter for the front doors.

These brackets fit the rear door of 2017 Highlander with the 6-3/4" Kicker speakers. They align perefect with the factory holes with no modification. If your installing speakers in your vehicle; brackets are a must buy item, because they push the speaker out far enough, so you can roll your windows down.

I used this product to upgrade my door speakers in my 2012 Toyota Corolla LE with JBL’s Infinity speakers. They worked great and my car sounds amazing. It was fairly easy to install, however the nuts that came with the bolts didn’t fit, which was really weird so be prepared to have separate screws if necessary. I don’t know if mine was just a fluke, but it would have been quite annoying if I hadn’t had my own replacements available. Other than that strange mishap, they worked great!

As advertised

Replaced the factory door speakers in my 2010 corolla and needed this adapter. Speakers themselves lined up very well the adapter but the hole alignment to the door had one of the holes off a bit and needed to drill the hole bigger to allow the screw to line up properly. This happened for both doors so appears to be related to the design measurements. Not a big issue for me but you should be aware that that a small tweak may be necessary to the bracket as it is shipped.

These are PERFECT! I was trying to install 6.5" CT Sound Meso speakers until i realized the stock speakers needed a bracket. Found this match with same day delivery. I cut the tabs using a Dremel even tho i realize now thats overkill and you only need to snap the tabs that are not needed off. I cut the inside tabs off and the outside 2 longer tabs. I used my own hardware because the hardware it came with im not sure how i feel about it. Dont overtighten the mount to the door or you probably will crack it. Treat it as plasic not metal a snug fit is good enough. I am a happy customer.

Just installed these speaker adapters in my car, and they're pretty sweet. Made the whole speaker swap so much easier. Fit perfectly, no modifications needed, which is always a plus. Sound quality is great, no rattles or vibrations. Definitely recommend these if you're upgrading your sound system. Saved me a ton of time and hassle. Overall, a solid purchase.