02 Series

The media could not be loaded. Got these to replace my son's grips which have taken a beating from him. I am super impressed with these. They are way nicer than the ones that I had installed previously. The grips are wider and have more cushion on the for your palms to rest on. The horns are longer than the previous pair as well. It took longer to remove the previous grips then it did to install this pair. Super easy to install, just one hex head screw and your all set. I took his bike for a teat ride afterwards and these feel amazing. Check out my pcitures so you see how agressive and good these look. Got the before and after pictures too so you can how these a re bigger and nicer than the old pair of grips.

I have been using these grips for about 2 weeks now. They are working perfectly. The installation was tricky as I had to remove the existing grips on my Giant Talon bike, but after a little struggle, I removed my old ones and was able to install these new ones.The would suggest following the installation guide as you definitely will have to adjust your brakes to make sure you have 132mm for these grips to fit securely!I would recommend them to mtb owners, as they are comfortable and my left wrist pain has reduced after using these grips!

UPDATE: I bought a second pair of these. My original review is below. The grips and horns are exactly what I wanted. The grips give enough support to the heel of your hand to be able to rest them comfortably and the horns are exactly where I want them. They're perfect. The only reason I'm not giving 5 stars is that you have to be very careful in over tightening the grips. The section with the horns does not fit on the handlebars, but sits off the sides, connected to the grips. Overtighten and they will pop right off.I learned this from the first grips. You can still tighten the grips. but with a little force, you can rotate them with your hands.The customer service from PRUNUS was great. After reading my review, they reached out to me to make sure I was satisfied with the new pair and offered to refund my original purchase. The grips are great, but be aware of the issue when installing ans tightening. Keep that in mind and you'll love them.----I had these for about 5 days and both grips are broken. The pad size is perfect and the horns work great. But the inside pieces are made from plastic that have already broken. If you over tighten the ends, they pop right off. Don’t tighten them enough, they slip. I bought a second pair hoping that the first pair was just faulty. Fingers crossed.

05.09.21----Updated Review of PRUNUS Handlebar Grips.Apparently PRUNUS had responded to my initial review of the grips that I ordered by sending me a new set with the bar-end hole/plug which allow me to install my mirracle MTB bike mirror. Obviously I did not realize this "outstanding" customer service activity on their part at the time or I most definitely would have commented favorably for their service a few years. This is definitely my fault and I hope that this review update will reflect the high marks I give PRIMUS for not only the grips I purchased, but the company's customer service. I'm still happily using the grips several years after purchase but will be buying a new set ptetty soon. I definitely recommend these or others sold by this company.Original review follows:(08.11.2019) Unfortunately I had overlooked the questions/comments regarding bar end openings. I use a bar-end mounted "Mirrycle" rear view, so was disappointed to see that there are no capped openings to allow for bar-end accessories. Rather than hassle with a return, I simply drilled and reamed a hole in the end of plastic cap to allow mounting of my mirror.Have only just installed them so cannot comment yet on comfort, grippiness, etc. So far they seem as though they should work well and hopefully they'll provide adequate support and comfort for frequent long, sometimes rugged rides. They seem sturdy enough and look pretty good on my bike. I'm happy with both types of grips I have from PRUNUS, as well as this seller's customer service. Highly recommend!Happy trails!

These are long grips as other reviewers have noted. You will have to move your shifters and brake levers in all likelihood. But they're worth it. I've got carpal tunnel and wouldn't ride without an ergo grip. These tighten just fine with no movement and no risk of over tightening. Here's how:- Loosen the brake and shift collars and move those controls as far toward the center of the bar as they can go- Insert the grip on the bar end and firmly tap in with the heel of your hand. It will take several taps until it stops moving in by a few mm's each time. This is important, if it's not all the way in it won't tighten.- Use the supplied wrench and tighten the grip until it *starts* to meet resistance.- See if the grip will turn on the bar. Initially it should. Turn 1/8th of a turn.- Check and repeat the 1/8th turn process until the grips don't move. The small turns are important to not over tighten. Take your time. Then stop.These make a big difference for carpal tunnel and are a great value.

I wish I knew about these ten years ago. I've been riding with "standard" handlebar grips and just assumed that I needed to "put up with it." Now, I look forward to riding even more, knowing that is one less pain to manage (now, my back and butt is another story...)I had to cut off the original grips on my bike with an exacto blade. Installing these new ones is very straightforward, even including the need to measure off in millimeters.Furthermore, once on, I had to adjust the grips slightly to make them more level, but those adjustments are very easy once they are on the bike.Overall, very very pleased.

Unfortunately on my second bike ride the plastic part that connects from the rubber grip to the extension snapped off and broke. I’ve had other brands last me years I had initially wrote a good review for the fact that the price was good and the product seemed of good quality. I ended having to throw it away.

Hola, Realmente me decepcionó el artículo traté de instalarlo y de entrada al ajustar con la llave incluida sólo ajusta un lado del puño y los cuernitos que incluye no le veo gran utilidad porque se mueven mucho, encontré el mismo producto 3 veces más barato en ML.

As you tighten the end to keep it all in place, it falls apart and falls off.

Very comfortable. No stressed wrists from a long bike ride. Prevents hands slipping off the bars. Firmly attached and easy to adjust. Bought 2 pair. One for the road bike and the other for the mountain bike. Very impressed with the quality and at a great price.

Easy to install and works well, even with a bar end mirror installed to the end of one.. comfy too. I'm pleased with the grips. Thanks

The stock grips on my bike had the ergonomic shape, but were just friction fit, so they moved around and I had to twist them back into the right position each time i was riding. These ones have clamps at both ends, so they stay put. The little "horns" also give a nicer way to grip when pedalling out of the saddle. I see some reviews say it stops their hands from slipping of the handlebar ... I have no idea how that even happens - it has never happened to me in decades of riding - but if you think that's important then these will help with that too!