FENTEC Printhead Cleaner 100 ML Printer Cleaning Kit, Printer Head Cleaning, Printhead Clean Kit for Epson HP Canon Inkjet Print Heads

So after my printer clogged up in particular the yellow print head on my Epson, I thought rather than throwing it away let me try the print head cleaner first, Upon first try I connected the tube to the print head and pushed through the cleaning liquid and left it for 24 hours, The next day I disconnected the syringe with the fluid inside and put the yellow cartridge back inside, and ran a print clean head on the Epson software. All of the colours worked, black, magenta, blue but not the yellow which was the blocked head. I ran approx 3 print clean head cycles but it didn't work, so I took out the yellow cartridge, and connected the syringe to the yellow head and again pumped through more cleaning fluid. I left it for another 24 hours, took out the Syringe and put the yellow cartridge back in, again I ran upto 3 print cleaning cycles through out the day not all at once. And to my suprise the yellow actually printed but with lines. So now on the 3rd day I connected the syringe and pumped more cleaning fluid through. Left it for 24 hours. Disconnected the syringe and ran a print clean head cycle, this time no yellow printed at all! Anyways I ran 3-4 print head clean cycles through out the day and on the 4th one the yellow started to print with Zero lines. So eventually after 4 days of perceivence I have successfully managed to get my epson printer working. If I didn't try for 4 days then I would have said this product does not work. So anyone trying this product I would advice be patient and give it a couple of goes. The nozzle within the print head does take a lot of time to dissolve the dried ink so patience is Key 👍👍

I suspect most of these solutions are the same and it's down to what's included in the kit. I had an Epson inkjet that had a yellow printhead that wouldn't clear using the printer's built-in functions. The Fentec kit came with necessary tubes etc. - mine only needed the main tube - but the instructions talked about using blotting paper. Who has that these days? So I had to first order some of that as well and it would have been helpful/obvious for this to have been included with the kit. I followed the instructions and some YouTube videos and successfully cleared the yellow printhead. I then repeated with the other heads after the black then misbehaved after it had been left drying out while I was messing with the yellow. All good now though - which is the main thing. So the product is certainly worth a go ahead of junking the printer!

I ordered this after watching a YouTube tutorial on cleaning the printheads of our HP Printer. We had a problem with the Magenta not printing despite the usual cleaning and troubleshooting being done. The process was easy and worked first time (instructions advise it may take a repeat application). Highly recommend if your printer is failing - worth trying to watch a video tutorial to fully understand the process before beginning and to make sure the required protective measures are in place.

To clean a printer head is a messy job, no matter what tools you use. This kit does give you the basic materials to clean the heads, if there are minor blocks. It doesn't always works if the printer was out of use or had been blocks for a long while. For a more deep clean you do need to take parts out and to clean with the fluid this kit came with. It's messy stuff.

Good price. Good quality items. My HP Officejet Pro 6960 was passing all the maintenance but when printing solid colours, mainly black, it produced missing lines and faded sections. I wasn't sure it was fixable. I though I had to buy a new colour printer. I use the solution as guided over 2 days. Ran the maintenance again. It fixed the problem. I will print more frequently to avoid the pads & jets from drying out or clogging but I know that I have the remaining solution in the cupboard.

Bought this to try and ressurect an Epson printer that i hadnt used in around 6 months. While it did work to unclog some of the print head, i think my printer might just be beyond saving at this point. Likely going to replace it with a laser printer instead since toner doesnt tend to dry out and knacker the entier printer.

I was unable to use this product because the end of the caps that were supposed to fit into the tube were made of soft plastic and I was unable to fit them into the tube. I finished up buying a new print head on Amazon

First watch a youtube video of Epson print head cleaning. Product easy to use but have plenty of kitchen roll for cleaning up used fluid. Blotting paper works ok under the print head but there is a lot of inky fluid which fills the black foam rubber bed under the head. Kitcken paper to soak up excess is great. It is a somewhat messy business and gloves are required. The print heads had dried up because of lack of use and would not print properly despite head cleaning via the printer software. This product did the trick after two uses, one being overnight. Excellent product.

Producto tal como anuncia el fabricante. Todo muy completo, trae tres boquillas, una jeringuilla, un tubito, unos guantes, y una especie de boquilla para el bote. Y por supuesto el líquido. Lo probé en mi impresora Epson, porque el color azul no me salía. Después de poner el producto, en todos los cabezales, la impresora está como nueva.

Macht sehr gut die Köpfe sauber und ich konnte meinen alten Drucker reanimieren…..

Cuando una impresora se obstruye por la falta de uso, uno puede volverse loco para arreglarlo. Algunas veces se puede solucionar a través del propio software con la opción "limpieza de cabezales" ó usando los códigos de mantenimiento que en cada marca son diferentes, pero si llevas mucho tiempo sin usarla es bastante complicado conseguirlo. Este producto da muy buenos resultados. El proceso es lento, dependiendo del tapón de tinta seca que exista, se consigue mas o menos pronto. Pero a base de insistir puedes revivir tu impresora. usa bien el kit para el modelo de tu impresora ya que es diferente la conexión con el cabezal y el accesorio. Pon siempre papel absorbente en el fondo del carro porque se libera mucha tinta.

Ho acquistato questo kit per pulire le testine ed ugelli di una stampante Epson a getto di inchiostro che era ferma ormai da 4/5 anni. Ci è voluto tempo e pazienza ma il lavoro è stato portato a termine con successo, grazie anche alle linee guida del manualetto di istruzioni, e la stampante ora funziona perfettamente. 5 stelle meritate

Franchement, excellent produit ! Ce kit FENTEC a fait des miracles sur mon imprimante. Les têtes d’impression étaient bouchées depuis un moment et après nettoyage, elle imprime comme au premier jour. L’utilisation est simple, tout est bien expliqué, et le résultat est impeccable. Je ne m’attendais pas à une telle efficacité — ce kit a vraiment décrassé les buses en profondeur. Très bon rapport qualité-prix, je recommande vivement à tous ceux qui veulent entretenir leur imprimante sans se compliquer la vie. 👌