Gluelines Zap Ca Thin 1oz bottle PT08

The best thin superglue in my opinion as it keeps longer than any other I have used

Good stuff and good delivery. ...thanks.

Everything I've used it on it has still come together pretty much forever, Drys within a minute, if you use kicker, it dries as soon as it contacts the other service. 10/10 would recommend

Supplied o time for a good price

Works really well. VERY thin so be careful.

Excellent glue

Got this product for a crack in a headlamp on my BMW 5-Series. It went into the crack of the plastic headlamp like water and filled in the full thickness. I was amazed at the sheerness of the finish and it didn’t effect the lamp’s brightness. Saved me €1200 for a new one.

routine replacement of the best thin cyano.

il miglior adesivo cianoacrilico sul mercato per uso modellistico ,essendo molto liquido va molto in profondita ,io lo uso in campo modellistico

I have an old electric Koh-i-Noor eraser that I dug out and disassembled to replace the rechargeable battery. The plastic case had become a bit brittle over the decades, and had numerous hairline cracks and a broken bolt socket that needed careful gluing. I made sure to clean everything carefully with pure alcohol before gluing, and the results were great – the cement consistently gets into small cracks very well. There's a nice amount of "wet time" to make adjustments, but not so long that you have to hold something in place for an extended period. It can be a bit messy because it's so fluid, so you have to be careful not to over-apply it. On my first try, I didn't know what to expect so it kind of poured onto my hand. Like most super glues, human skin makes it react very quickly, so I had glued-together fingertips until I carefully separated them. If this happens to you, here's a tip: after carefully separating your glued skin, you can remove the glue quite easily by putting on some tight rubber gloves (like shop gloves) for awhile... do some work on whatever for 20-30 minutes and the sweat from your skin will release the glue like magic. As other reviewers have mentioned, if you need to buttress a repair for strength you can use baking soda.... just build up the baking soda to shape and apply a few drops – for some reason the baking soda dries the glue almost immediately, so be sure you have the baking soda exactly where you want it (I used a small artist's paint brush to push around the baking soda and clear away the excess before applying the glue). Really excellent stuff for what it's designed for, and a great thing to have around. The small tube cleans very easily, and you can use a round toothpick to clear the tip. I'll be using this extensively I'm sure!

Excellent, meilleur que les produits de la grande distribution

L'arrivo non e' stato tempestivo, forse la Pandemia o forse la Brexit. Il fornitore pero' si e' comportato seriamente e non ne ha colpa. Il prodotto e' ottimo ma questo era noto.

Very low viscosity. Penetrates fly tying materials very well. Nice stuff.