Clear Rubber Edge Protector, Self-Adhesive U Channel Trim, White Silicone Rubber, Fit 1.6mm, Length 10Ft - For Sheet Metal, Car Doors, Cabinet

This was ideal for my application. I placed it around the edge of a large piece of plexiglass, and it fit perfectly. Easy to install , cut to fit and remove the cover material for the adhesive. Would recommend this product for it quality and ease of application.

Exactly as described. It's easy to use pull the red strip and it adheres. I used it on glass for a shelf in my sons room. Works great

I was getting some pick wear around the sound hole on my Martin guitar. I installed a small length over the problem area and it provided a very good solution. It isn’t extremely noticeable and does not hinder my playing. It will protect my guitar and can be removed at any time.

I recently purchased the Clear Rubber Edge Trim, and it has proven to be a fantastic addition to my projects. The self-adhesive feature makes application incredibly easy—simply peel and stick, and you're good to go!This edge trim provides excellent protection for sheet metal, glass, and flexible materials, ensuring that sharp edges are covered and safe to handle. The clear design is discreet, blending seamlessly with various surfaces without detracting from their appearance.I’ve found it durable, withstanding wear and tear while maintaining its adhesive properties. Overall, this edge protector is a must-have for anyone looking to enhance safety and finish on their DIY projects. Highly recommended!

This is an excellent product that was exactly (almost) what I needed for my project. I needed a slim, non-overbearing, attractive edge cover for an edge of 1/8" acrylic. It fit perfectly and the final result was verysatisfactory. As far as some precautionary notes ... the edging itself is NOT totally clear but opaque (milky).Placed on clear acrylic it is still acceptable and does not detract from the aesthetics of the piece. Adhesion is good so far. I would suggest spending a little more time ensuring adhesion with pressure after completion.Application is a bit tricky when first beginning but does slip over the edge easily once started. Suggest running a piece of fine sandpaper on the edge of the piece to smooth and remove any burs. Use caution as to not remove the red tape while installing. Do not force the edging. Tape will remove easily once the edging is in place as shown on the video/instructions.Special "caution" ... the video shows the edging installed around a square corner making mitered cuts. In reality, this is easier said than done. I practiced on a piece and failed each time. If miters are not cut exactly, the corners will look sloppy. The edging does not cut as easily as the video shows. I used very sharp crafting scissors and an Xacto knife and was not able to get exact cuts.To compensate, I ordered small clear adhesive corner protectors from Amazon and butted the edging up against these corners. The result was a very professional looking project. Suggest you ensure the corner protectors are compatible with the thickness of your piece. Also, after installing the corner protectors, I used a small clamp on each one to remove any air bubbles and smooth out the adhesion.Hope this helps. Good luck with your project.

This product is useful to use it indoor and dust free zone. This isn’t a good idea to use it in cars door edge. It collects dirt and will end up throwing the very next day.

The edges of our desks at work are rough and were pilling and pulling my shirts and sweaters...I am short and sit pretty close to the edge of the desk. I put this on the edge and have no more problems. Installation is easy, it seems durable, protects my tops, it's not quite clear but is not really noticeable, which is good. They are a substantial thickness, I expect it to last a long time. Liked it so much I bought a second roll so that anyone in the office that wants to can use it.

Works as advertised good quality