2 Set Back Rear Camera Lens Glass Replacement for Google Pixel 7 with pre-Installed Adhesive and Reparing Toolkit

Was super easy to install and works great. It was much easier than installing a screen protector. I'm never successful with those things.

I was actually preferring a similar listing, but this one was delivered a day earlier so I went with this replacement. If you are careful this is a pretty easy replacement. I used the tweezers for most of the removal as the glass had a spider web fracture coming from the center. Q-tips with alcohol helped with taking off the double sided tape. No heat was necessary. For safety and preparation I suggest nitrile gloves, safety glasses, a plate or surface, and then paper towels or plastic underneath. A few fractures of glass did go flying so I vacuumed the whole area with a dust buster and floor vacuum.The black double sided tape that is underneath the glass helps some of the pieces stay together and I worked my way to one edge then around in an oval. Shaking the glass pieces onto my plate that were falling onto the lenses. I used the tweezers to pull away from the lenses and use the sides as leverage and then scraped with the scalpel when needed. I continually applied more alcohol with a Q-tip around the edges to clean and also remove the black tape. If I got a little space with the glass I dabbed some more alcohol to loosen it for removal. Unfortunately I did not have another camera to film this but everything came off cleanly. Remember to remove some stuck tape from the center of the microphone but I do not think it is necessary to remove all the tape around the microphone.Once it was mostly clean of glass I used a Q-tip with alcohol, the dust cloth provided in the kit, as well as the tweezers to clean the edges and remove any additional glass pieces around the lenses. I also stuck the dust buster over the lenses to see if I could pull up any debris as tiny bits might have fallen behind the sides of the lenses. Lastly I used a provided wipe for the lenses and the glass area, the provided dust tape, and the provided dust cloth.Satisfied with the cleanliness of the phone I then applied the first replacement glass using the tweezers to pull the blue side tape off. I must have manhandled the replacement as the glass fit perfectly but i tried to press or slide it in and cracked the first replacement on the side. I had not tamped down the replacement and the tape had not set all the way so I had to repeat the process of removing the glass. The second replacement went in perfectly so I left the top tape on and used the cloth to gently press it into place.Overall probably the best replacement part I have ever done for a phone so far and would definitely do this again.On a side note, this may have been covered under my warranty but dealing with google as well as their authorized repair shop was a much bigger hassle than ordering one of these for next day delivery and repairing it. The repair itself was less time for me than even a round trip to the shop.

Great replacement glass for the 7. Great price and real easy to install with everything provided.

Fits perfectly no issues at all

This has to be the value but of the century. Everything is included and installation was very easy. Read the instructions, watch one YouTube video then get to work and work patiently. Very straightforward and it looks and works fantastic. Just be careful to remove the old glass carefully, clean any dust, and hold the new glass by the edges when setting it into place.The glass has a little bit of glare compared to the original, probably a cheaper antireflective coating but honestly for this price point and performance I could not be happier.Google left us high and dry with the phone design so until there is a class action to force them to fix it, this is by far the best and most economical solution.All in was about 15 minutes to cautiously repair.

Seems to have worked pretty well. Tools included made removing the existing lens glass and glue easier than expected.Update: camera would not focus after glass replacement. Removed new glass, camera worked fine, replaced with second provided glass, same issue2nd update: camera is now focusing. Could have been because I did not turn the phone off during lens replacement

There's a lot of options for Pixel 7 replacement lens but this one seemed to check all the boxes. If you have a Pixel 7 it's probably a matter of time before your lens shatters. Mine popped EXACTLY the same as all the others I've seen online. I wanted a real glass replacement that would fit perfectly. This one does both. The listings show the lens from both sides so some purchasers think there's 2 lenses included, but unless it shows 4 views (2 lenses, both sides) you only ordered one. My recommendation is get 2.The included instructions were generic but very clear. It helps to heat the old lens with a hair dryer to loosen the adhesive. I also set up a vacuum cleaner hose so that it sucked up the glass bits as I picked off the old lens, It came off rather easily and I made sure everything was removed and clean before placing the new lens into the indent. There's a clear protector on each side of the new lens--remove ONLY the front one and use the provided tweezers to lift it off and put it in place. I took the rear one off and somehow put a fingerprint on the inside of the lens, which I didn't realize until I had it in place. It didn't really affect the picture quality, but I'm a perfectionist so I had to change it. That's why i recommend getting a kit with 2 replacement lenses.Interestingly enough, the replacement lens was harder to remove than the factory one. In either case, there's plenty of surface area for the adhesive to bond to so I doubt very much this would cause the phone to lose its waterproof rating, As recommended, I heated up the new lens with the hair dryer to activate the adhesive (both times) and I think that's what makes it bond really well. It took probably 15 minutes from start to finish. Overall I couldn't be more pleased with this product. It's so high quality and so easy to replace that I no longer worry about the Pixel lens breakage problem.