Tagging gun TEXI 75F Fine pushes the fastener and information label through fabric. The needle is replaceable after breaking. User manual: 1.Insert fasteners cassette thinner side into the tagging gun, push as far as possible. Now the gun is ready to use. 2.Push the needle trough the lable hole and product, hold the gun firmly against the product and press the handle. 3.Release the handle and pull the needle out of the product. 4.To remove halfly used cassette from the tagging gun hold down the little knob by the needle. 5.If tagging gun jams, first remove fasteners cassette, then remove the needle. Carefully remove jammed fastener from the gun or from needle. Do not press the handle if fasteners are jammed, because it may brake the gun. 6.To replace the needle turn the lever by the needle until the lever is pointing forward, if the lever is pointing backward, the needle is locked. In the middle of the needle is a long opening, which need to be aligned with the gun's opening. Push the needle as far as possible. Do not forget to turn the lever back, the needle can fly away when gun is used.
