Omnibus F7 V2 Flight Controller STM32 F745 MCU 2-4S Built in Betaflight OSD Dual Gyro 30.5x30.5mm for RC Drone
描述
- F7 MCU - faster than the current F3 and F4 processors.
- Two gyros on the flight controller: an MPU6000 for sampling up to 8khz and ICM20608 for sampling up to 32khz.
- Built in betaflight OSD
- 36x36mm, mount holes 30.5x30.5mm.
- SD card reader for recording black box data (SD card not included).
OMNIBUS F7 V2 now with inertial damping gyro jacket. The case mass absorbs & resists by inertial damping the vibrations coming from the motors, props, frame, ect... - The added crash protection. The case is mounted by Gell tape and not hard mounted to the airframe in the same way a normal gyro is isolated. In our testing this does work better then soft mounting the whole Flight Controller. Description: MCU: STM32 F745 (Spi connected to Gyro) MPU6000 (the 6 axis SPI Gyrometer + Accelerometer) IMC268 (the 6 axis SPI Gyrometer + Accelerometer) D-shot Support Dual Gyro Baro BF OSD microSD Blackbox Size: 36x36mm Mount holes: 30.5x30.5mm Weight: 10g Default firmware: betaflight_3.2.0_OMNIBUSF7V2 SBUS, IBUS, DSM2, DSMX Receiver configuration: UART2 Features: F7 MCU - faster than the current F3 and F4 processors. Two gyros on the flight controller: an MPU6000 for sampling up to 8khz and ICM20608 for sampling up to 32khz. Built in betaflight OSD 36x36mm, mount holes 30.5x30.5mm. SD card reader for recording black box data (SD card not included). Supports 2-4S natively 5V/3A regulator Port for easy connection to 30A 4-IN-1 ESC (SH1.0 8P) Package included: 1 x flight controller 1 x SH1.0 6P cable 1 x SH1.0 8P cable
