Micro Swiss FlowTech™ Hotend for Creality K1 / K1 Max
Thumbnail 1Thumbnail 2Thumbnail 3Thumbnail 4Thumbnail 5Thumbnail 6Thumbnail 7

Micro Swiss FlowTech™ Hotend for Creality K1 / K1 Max

4.2/5
产品编号: 613894020
安全交易
🔥Leak-proof nozzle seal
🚀High-flow 28.6mm melt zone
⚙️Cold nozzle change with one hand

描述

🔥 Elevate your 3D printing game with leak-proof, lightning-fast FlowTech precision!

  • BUILT TO ENDURE - All-metal construction engineered for durability and compatibility with modern filaments.
  • MESS FREE MASTERY - Say goodbye to filament leaks with a permanently sealed nozzle and thermal break combo.
  • EFFORTLESS UPGRADES - Swap nozzles cold and fast—no hot tightening, no hassle, just one-handed ease.
  • QUALITY YOU CAN TRUST - Each unit undergoes rigorous multi-stage QC and thermal cycling tests before shipping.
  • SPEED MEETS PRECISION - Experience superior volumetric flow with a ceramic heater and extended melt zone for flawless prints.

The Micro Swiss FlowTech™ Hotend for Creality K1 / K1 Max is an all-metal, leak-proof hotend featuring a unique sealed nozzle and thermal break design. It enables cold, one-handed nozzle changes without hot tightening, and boasts a high-flow 28.6mm melt zone with a ceramic heater for superior filament extrusion. Manufactured with strict quality control and thermal cycling tests, it ensures durability and compatibility with a wide range of filaments.

Large manufacture image 1Large manufacture image 2
Small manufacture image 1Small manufacture image 2Small manufacture image 3Small manufacture image 4Small manufacture image 5Small manufacture image 6Small manufacture image 7Small manufacture image 8

规格

ManufacturerMicro Swiss
Part numberM3101
Item Weight50 g
Package Dimensions9.4 x 6.7 x 3.3 cm; 50 g
Item model numberM3101
Size.4mm
Item Package Quantity1
Included componentsMicro Swiss FlowTech™ Hotend for Creality K1 / K1 Max
Batteries Required?No

评论

4.2

全部来自已验证的购买

G**A

Microswiss hotend

Blows the stock hotend out the water extremely easy to fit works perfectly well very good prints and heats up a lot quicker

A**R

Made my printer functional and reliable

I have had various issues with my K1, but one of the worst has been filament clogging and jamming. I have gone through 3 creality nozzles, all of which failed in the same way. The temperature probe failed. In 2 cases it became detached from the ceramic and on the third it started failing to read temperature properly, resulting in an aborted print.This kit from Micro Swiss has been a massive improvement, I've not had a single issue with clogging or jamming and it's not failed once. It's better designed and made than the creality original. Flow rate seems more consistent and print quality has improved.I would consider this an essential upgrade for the K1.

N**B

Amazing upgrade for the K1

I was getting a lot of heat creep with the stock nozzle causing frequent blockages. This has stopped all of that and makes it so easy to change nozzle sizes

D**N

Absolute disaster

Fixed it to my K1 max as an upgrade, within a few prints it completely blocked and helped ruin my extruder. Went back to stock, no more problems.

P**L

Quality product

Love this makes life easy to swap out nozzles

A**E

Dubious Quality Control

I have E3D Revos fitted to my other printers, and wanted a "fast change" nozzle system on my K1 Max - so I decided to try this. After the usual struggles with the glue that Creality apply to the heater and thermistor plugs, I powered up the K1 Max, only to discover that the heater core wasn't working at all.I disconnected the heater core plug and connected a multimeter to it, expecting to see 9 or 10 ohms resistance - but it was open circuit. I then connected the multimeter directly to the heater core contacts - again, open circuit.E3D perform a final test on all their Revo hotends, but evidently Micro Swiss don't. The engineering quality looks externally top notch, but they need to improve their quality control.I reported it as DOA to Amazon, who shipped a replacement straight away. 10/10 to Amazon - so I'd recommend ordering via Amazon rather than a third party for this reason. I'd also recommend checking the heater core with a multimeter before you fit it!The replacement arrived the next day, and it works fine. Other than running the standard internal K1 Max tuning tests I changed nothing else - and a 90 minute print ran flawlessly, with the usual K1 Max print quality.My experience was that fitting the hotend is a lot easier with the K1 Max laid down on its side. That makes access to the plugs (and especially the glue removal) much easier. I recommend inserting the two plugs first, as the smaller thermistor one has limited access with the hotend in place. You can then insert and semi tighten one of the hotend bolts, slot one side of the hotend flange onto it, and then wiggle the second bolt in. To avoid potential filament leaks, don't forget to tighten the nozzle itself to the recommended 15 inch pounds torqueSo, overall a very good upgrade to the K1 Max if you're looking for a quick swap facility (apparently a Creality equivalent is in the pipeline, but I couldn't get a release date from them). Nozzle swapping does indeed seem to be very straightforward, but not yet tested.The only nagging doubt I have is over the fact that the standard K1 Max nozzle had thermal compound on the upper end that inserts into the heat break. Micro Swiss don't supply thermal compound and they don't suggest its application to the insert when inserting and securing it to the heat break with the grub screw. So I'm going to keep an eye on that, and will order some Slice Engineering boron nitride compound as a possible "belt and braces" upgrade.In summary - a great product, but Micro Swiss need to improve their quality control.

O**.

mostly clogging then printing

well ive had 2 good prints out of about 15 try's with this hot end very easy to install with great colorful diagrams to follow but clog after clog on the first layer i did get around 30% through a print then clogged i was not sure if i installed it correctly , but checking twice with the diagrams and online i did yet tried all different temps , feed rate , retraction and things and still a no go without clogging trying to use hyper pla , pla + and normal silk pla and just clogging. so im done spend yuour money how you want.

常见问题

TrustPilot

TrustScore 4.5 | 7,300多个评论

Rajesh P.

当我对产品有疑问时,客户服务非常出色。

2天前

阿里·H.

发货快,包装精良。Leatherman 工具手感非常高档和坚固。

1天前

全球购物,通过 Desertcart 享受优惠
物有所值
各种产品的价格具有竞争力
全球购物
为 200 多个国家/地区的 3 亿多购物者提供服务
增强保护
深受全球购物者喜爱的值得信赖的支付方式
客户保证
深受全球购物者喜爱的值得信赖的支付方式。
沙漠车应用程序
随时随地随时随地购物。
HK$1208

关税和税费包括

Hong Kong店铺
1
免费退货

30天对于 PRO 会员用户

15天无会员资格

安全交易

TrustPilot

TrustScore 4.5 | 7,300多个评论

尤素夫·A.

总体来说,体验非常棒。会推荐给朋友和家人。

1 个月前

维克拉姆·D.

MOLLE 护套质量非常好。我对这次购买非常满意。

2 周前

Micro Swiss Flowtech Hotend For Creality K1 K1 Max | Desertcart Hong Kong