Color:Light Green Specification: Condition: Brand New. Item Type: Capsule Filler Product Material: ABS Holes Quantity: 100 Suitable for Capsule Type: 00# Size: 6.5” x 6.5” x 2.5” Package Weight: 1.763lb or 0.8kgPackage Content: 1x Director Plate 1 x Body Plate 1 x Middle Plate 1 x Cap Plate 1 x Temper 1 x Power Spreader 1 x Handle 1 x Powder block board to keep the powder from falling off the top 1 x Storage Pouch Step by Step Guide: 1. Join the Director Plate on the top of the body Plate 2. Place the long halves of the capsules into the Director Plate. Hold both parts and shake from side to side till the capsules fit into the holes. Then put the last few capsules into the remaining 3. Remove the Director Plate. Push down the body plate to ensure all capsules are in right position. If any, upright these capsules 4. Pour your filling onto the capsules 5. Use powder spreader to make sure the powder cover capsules evenly 6. Use the Tamper to ensure the filling is compact. 7. Now place the Director Plate on top of the Cap Plate 8. Then place the short halves of the capsules into the Director Plate. Hold both plates and shake from side to side gently. Remove the Director Plate and check for any incorrectly placed capsules then set right. 9. Place the Middle Plate on top of the Cap Plate. Ensure the grooves are facing up 10. Hold the Cap and Middle Plates together and turn over and to ensure the grooves are facing down 11. Adjust to connect the capsule halves together 12. Pull out the Cap and Middle Plate and ensure the capsules are properly closed by pressing down on them. 13. After Use, clean and store in the hygiene pouch provided.
