What does the phase toggle do? I read ther manual, but it didn't explain it in a manner I could understand.

Hi Mike, I saw your question and wanted to give you the correct answer. The phase switch determines the way the subwoofer cone ( speaker ) reacts. When set to "0" the speaker cone will move in the outward direction at the same time ( phase ) of your main ( left & Right ) speakers. When it is set to "180" the speaker cone of the sub will move inward when your main speakers' cones are moving outward. What this does is cancel out any overlapping frequencies between your main speakers and your subwoofer. When you have overlapping frequencies between your sub and main speakers you will get too much or "bloated" mid bass. Some people prefer "180" because they feel the cancelled out frequencies produces "tighter" and more accurate bass. Other people like more mid bass, so you need to listen to it both ways to find which you prefer. The same thing will happen if you hook up speakers with the speaker wires hooked up with positive & negative swapped ( positive speaker wire in the negative speaker terminal and negative speaker wire in the positive speaker terminal ). Just as an added note, the "Low Pass" filter knob will determine what lower frequencies pass through from your receiver to your subwoofer. The higher the frequency (Hz) the more mid bass the sub outputs and the lower the frequency (Hz) the less mid bass that the subwoofer outputs. You want the subwoofer to optimally blend with your main speakers and that is what the "low pass" filter knob allows you to do. If you are using a surround sound receiver and it is set for Dolby Digital or DTS surround modes receivers will normally automatically crossover the sub output at 80 Hz, so moving the Low pass knob on the sub beyond 80 Hz will have no effect. Now, if you have a surround receiver that utilizes the Audyssey Microphone system to adjust the surround parameters you will want to set the subwoofers low pass knob all the way to the highest frequency. The Adyssey system will determine what frequency blends best with your main speakers. Hope this is helpful.

how many RCA cables to receiver?

It has two RCA jacks, but if you have only one sub out one cable is fine - plug it into the left channel for mono.

The subwoofer does a cut off for 2 seconds when I turn the volumen up about 50%, anybody knows why?

Are you hooked up via wireless? Or wired? I know when you turn on your receiver or amp, since I have my sub on auto, it has to receive the signal from the receiver that there are low frequencies before it kicks on. So there is a delay. Once it has a signal of low frequency, it's on. But after I'm cranking music through the sub, I am able to blast more power, volume and it has no delay. It could be the music you're playing doesn't have low enough frequencies. Adjust your receiver or amp to pass all low frequency through to your sub. I'm hard wired to my sub, I do not get a delay, only on start up.I love my sub! Good luck!

Can you use with an existing soundbar?

Yes, if your sound bar has a sub output socket. Your user manual should indicate whether or not there is an output for a sub.

Desertcart Logo

Join PRO & Unlock Exclusive Perks!

下载应用程序

我们从

阿联酋
英国
印度
美国
日本

客户服务

关于我们

客户支持

我们的其他品牌:Hewyn|Selfship

规格

ASIN	B00MJ1YR8Y
Amazon 売れ筋ランキング	家電＆カメラ - 526,277位 ( 家電＆カメラの売れ筋ランキングを見る ) サブウーファー - 172位
GTIN (Global Trade Identification Number)	00743878026153, 00743878041958
MP3プレーヤー付属	いいえ
UPC	743878026153 743878041958
おすすめ度	5つ星のうち4.8 5,026 レビュー
お客様の年齢層	大人
ウーファードライバーの直径	12 インチ
オーディオアウトプットモード	サラウンド
オーディオドライバのサイズ	12 インチ
オーディオドライバーの種類	ダイナミックドライバー
オーディオ出力モード	サラウンド
カラー	ブラック///ホワイト
サブウーファースピーカーの直径	30.48 センチメートル
サブウーファー接続技術	有線
スピーカーの種類	サブウーファー
スピーカーサイズ:(cm)	12 インチ
スピーカーチャンネル構成	1.0
スピーカー最大出力	400 ワット
ツイータードライバーの直径の測定単位	0.75 インチ
バッテリ平均持続時間	8 Hours
ブランド	Klipsch
ブランド名	Klipsch
メーカー名	Klipsch
レンズマウントの種類	テーブルトップマウント
互換デバイス	ホームシアター
付属品総数	1
保証タイプ	限定保証
取り付けタイプ	テーブルトップマウント
同梱商品	サブウーファー。
周波数応答	29 Hz
品目の寸法（D x W x H）	70奥行き x 95幅 x 50高さ cm
商品の推奨用途	テレビ用
商品の用途	ホームシアター、音楽再生。
商品の重量	0.01 オンス
商品外装素材	プラスチック、銅。
型番	R-12SW
接続技術	有線
最大レンジ	20 メートル
最大出力	400 ワット
無線タイプ	ワイヤレス通信技術なし。
管理方法	遠隔
通信・接続インターフェース	有線
防水	FALSE
防水タイプか否か	非防水
電源のタイプ	電源コード

レ**ン

コストパフォーマンス良い

お値段を考えるとお買い得だと思います。ローエンドはそこまで伸びないけど十分な低音は出ます。ただ、１４畳のAVルームだと３６ｃｍウーハークラスがよかったかなとおもっています。銅蒸着振動板は見た目が格好良いです。

Invalid date

A**R

BASS!!!

The official rating for this sub is 29-120hz. Let me tell you, it goes much lower. It can put out around 18hz at about 70db. It goes low and remains clear. The mid range (30-60hz) is louder and more powerful, but this sub goes low enough that you can feel the LFEs. It is a beast and the best sub I've owned. I had the Yamaha NS-sw500 that is rated 20-160hz. But the klipsch goes lower and sounds better across the board. Cannot go wrong with this sub.

Klipsch サブウーファー R-12SW

细节

描述

规格

评论

常见问题