MPD Digital I LMR400 Times Microwave Coaxial Cable I N Male to N Male Connectors I Low Loss RF Coax I Jumper, CB, Ham Radio, Transmitters, Antenna I 25 FT

Cable improved device performance 500% when compared to device performance with cables provided with device.

These are the real deal. Buy with confidence, I had never used these and all I can say is the quality is very high and these cables work really well. I'm using this cable, and a 35' version of the same to feed a Diamond x300na on my roof. My SWR for VHF is right about 1.2:1 and about 1.3:1 for UHF. I have a lightening protector in between these using #6 wire to my grounding rods.

This is QUALITY COAX with N Male Connectors.... I am using these large size jumpers to go between my ELECRAFT K3 and my 902 Mhz and 1296 Mhz transverters....then the other set between the Transverters and the Amplifiers for 902 and 1296 and the FINAL set to my Grounded distribution block that supports all the coax cablesthat go to several antennas outdoors...I am an Amateur Radio Operator... Licensed since 1978... Ham Call is NQ8A

This is a great cable. You can't beat LMR for low loss vs cost. I've been testing all types of antennas and cable combinations to extend LTE from a remote area with a weak signal to an even more remote area using Wilson yagis with a ZTE MF279 coupled with Mikrotik SXTsq wireless bridges. Using this LMR400 instead of RG58 for the yagi-to-LTE router link caused a gain of -11 dBi. Don't scrimp on your cable if you need to squeeze out every bit of efficiency.

Excellent quality cable and connectors. I used this for an ADS-B antenna and performance is right where it should be for the cable length. The connectors are solidly installed and the shrink tubing over the connectors and cable ends provide a solid physical connection. Still, one should also anchor the cable and not let it hang to prevent any possible separation. Very happy with this purchase and I plan to replace some RG-8 cables with this since the performance will be better at UHF frequencies with the LMR400.

Reason I got this was for a cell booster. Made a world of difference compared to the RG6 cable I had. Download speeds on 3g went from 1mbps to 3mbps and my uploads went from 0.5mbps to 1mbps. Cell tower is 32km away from us over 4 hills. Well worth getting quality cable! Cable itself is pretty rigid and tough. Had to get an adapter to go from the antenna to the cable and from the booster to the cable. Worked fine without issues.

Quality made cable. No problems. Will stay with this company for future cable orders.

Excellant - I am impressed buy how the coax forms, it is like bending tubing, stays bent, does not fight you like a spring and go back to coiled etc. I'm using a 20ft length for 1.9MHZ PCS LTE band 25 with a wilson repeater and an 8dbi antenna and went from barely 1 bar outside to 3 or 4 bars indoors now.

Excelente producto lo instalé y si tiene mejor desempeño que otros cables ahora sólo esperar a la resistencia en la intemperie