Summit SUM-004 Railing Roof Bars For Cars With Flush Rails, Aluminium, Locking, Set of 2-1.2m, Silver

Good buy if you gonna take them off and on and not use them much like me there worth it sturdy easy to fit comes with a rubber for underneath I fitted them on first put tape by the edge to know where the rubber will go marked up then cut and fitted on the ends I put the bars back on and the locks then just gradually cut the rubber to fit but take note if you take them off you need to remove just the end rubbers to take lock off don’t have to use the rubber it’s by choice meant to help with wind noise but to be fair can’t hear a great deal but nice looking just what I needed good price too easy to set up just a tip take time to put them on don’t rush it and you’ll see how easy to put on end locks are ok no issue at the moment

Bought these for my Vauxhall insignia estate.They come as a pair in box.The rubber underneath strip comes separate.I used washing up liquid to slide it up the underside track& a pliers to pull it.They are very sturdy bars& ok value for money.The very front bar,I had to bend the clamp a bit more to grip the front rail on car,but other than that, I'm very happy with them.

Fitted perfectly onto my Zafira. Great value for money! Did the job no problem. Instructions are pretty basic and difficult to understand, however we managed to get them on after a bit of youtubing. Great product though, and still going strong!

I needed a set of roof bars to fit a Kia Sportage which has flush side rails on the roof, and chose this set as they seemed to offer a balance between cost and quality, as well as having some recommendations online. They proved to be easy to set up and with a few careful marks on the rails using a permanent marker I have been able to fit and remove them whenever needed.They are good quality and strongly made, and they stay safely in place even when loaded. The only negative point I’ve found is that the locks are more for show than real security, as even though they’re key-operated it doesn’t take much effort with the right tools to prise off the plastic endcaps which the locks are fixed to. I was aware of this before ordering them, and as that’s not an issue for me it wasn’t a big deal. However, I wouldn’t leave them unattended if there was a valuable load on top.

(1) Ordered - arrived - looked good 👍 BUT went to put on the car and keys wouldn't operate the lock so couldn't fit. Sent back and replacement delivered on the same day as first one collected👍BUT (2) no instructions, no allen key AND frustratingly NO keys so returned again. Packaging has clearly been opened before so presume this one was also a return. Don't have a major problem with this in principle BUT AMAZON should check that everything is there and working BEFORE sending out

As with other reviews, the locking ends are absolutely useless, 1 of the 4 was not even able to push completely in with the little metal bars and had to leave them out (bars too long).The bars should not be advertised as locking, and really should be used as a visual deterrent to anyone wanting to steal them,They do fit the car fine, the clamps are made of steel so I was concerned they would damage the rails on the car and as its a Motability car and is due to be replaced soon I didn't want that.I used some stick on padding tape to protect the clamped area and its worked fine.Probably overpriced considering the locks, the lock itself does not appear to be able to even catch on anything at all so I don't even know how it would work.

Works great. The only hassle is putting the rubber seals in the bars, before any installation begins. Part of the process, though.But brilliant product, recommend.

I still don’t know what the extra rubbers are for? I think you are supposed to cut them to size and fit them (somehow) once you have locked in the aperture.