KohreeRV Lights Interior, Upgrade 800 Lumens RV LED Ceiling Lights, 12V RV Lights Fixture with ON/OFF Switch for RV Car Trailer Camper Boat, Natural White 4000-4500K, 48X5050SMD (5PCS)

Excellent condition and excellent led light

Very good lighting.

They work good for places you need light, over the dining room table, up on the high ceiling or a bathroom and with the selector switch it helps to control how much light you get,. They are bigger then the original ones so make sure you have enough room.

More light! Less energy! I know sounds like an old beer commercial, but its true! It lights up my RV bright as day! Yet, it doesn't chew up my battery life like the old bulbs.

VERY NICE LIGHTS! Wow what a difference they made in my 1994 RV. I had already changed the bulbs out to LED, but these were literally night and day difference. Could not recommend these highly enough. Very easy to change out. No need to worry about polarity, you can hook them up either way, no problems. But... you might want to get your own wire nuts though, the springs would not stay in most of them, but I managed with some electrical tape.

Wow, the lights are BRIGHT and easy to install.

Great

I have always thought our camper's factory incandescent lights were way too weak. Last year I tried some replacement bulbs from Amazon (XCSOURCE 10PCS Warm White 1156 BA15S / 1141/1073 / 1095 Base 18 SMD 5050 LED) but found them to be no improvement - in fact, a little dimmer. Still wanting more light I decided to try these.I received the lights and they were nicely packed in a bundle but well protected from damage and scuffs. Installation was easy - simply removed the old lights, clipped the wires, stripped the ends and used the included connectors to complete the wiring for the new lights. Polarity doesn't matter so just attach whichever wire is easiest. The old screw holes did not line up, plus the old screws were too large in diameter for the new fixture, so I just used the included screws making new holes. All the old holes were hidden under the new fixture so it yielded a clean installation.Time to turn them on. The first thing noticed is these are bright. Very bright! The second thing is light is definitely whiter than the old incandescent. The info said they were 4000 to 4500 K but to my eye they are probably closer to 5000 to 5500 K. Not bad but sure is a change from the yellowish 1141 bulbs (2000 to 2500 K?).So how bright is bright? Using an app on my phone to measure LUX I got these results - Old incandescent double bulb (1141) fixture with both on = 30 LUX. New fixture with ONE light array on = 98 LUX. New fixture with BOTH sides on = 203 LUX. So yes a lot more light. We find for our use having just one side of the fixture on provides a comfortable amount of light for normal use. But it is nice if I am working on something or we are loading the camper for an outing I can just flip the switch to both sides and have plenty of light to get the job done. The exception is in the bathroom. There we like the bright light and leave both sides on all the time.One other thing, as a few others have pointed out these do cast sort of unusual color pattern. I have seen this with other LED array type lights including the replacement bulbs I mentioned above. If the light is shining on a solid white or light colored surface (like a bed sheet) it makes it look like there are discolored or dingy areas. I can see how this may be distracting to some. But in our case, the lights are mounted in the living and bath area which has no solid light-colored surfaces and the color pattern is totally masked. So for us, it is a non-issue.So, overall we are pleased. Sure I wish they were a little more to the yellow side of the Kelvin scale but we can live with it. Love finally having adequate light.