Jeremywell Tube Notcher Pipe Notcher Punch and Press Tool for 0-60 Degree Angle - Up to 2 inches Diameter - Round Tubing Bore Hole Machine Mild Steel Stainless Alum

Works great for what it costs, bearings are running nice even after notching a lot of .120 dom. Make sure all the bolts stay tight, I might have been moving too fast which vibrated it apart but it was just enough to notch the tube wrong by slipping

Works like it should. Was missing the T handle threaded piece, got in contact with the company and they sent me one no questions asked.

The frame is nicely powder coated and heavy duty. Requires a little assembly and instructions say to grease the bearings - not a big deal if you have grease handy, just a heads up. The shaft that holds the saw comes in a bag and is lightly oiled. The tool isnt covered in stickey, smelly grease like you get other tools (you probably know what i mean). One problem is that the saw did not align with the center of the DOM tubing i was cutting. I installed two 3/8 X 1" X 1.7mm thick washers under the shaft block to align the saw to the tubing. The tool is working great!

This tubing notcher may look like the harbor freight version but it is 100x better. It has needle bearings instead of bushing which makes for much less slop in the shaft which means more accurate notcher. And everything else is just built way better. Spend the extra $10 over harbor freight version and buy this one instead

Exceeded my expectations of the tool.

This notcher works so much better than the HF version. Used it to notch 200’ worth of 1 3/4 .095 tubing and worked flawlessly. Highly recommend.