MOOG K8749 Front Lower Suspension Ball Joint for Ford Mustang

Make sure to lubricate and fondle your balls and make sure you rent the tool from your local parts place to make the job go easier.

Worked perfectly for my Mustang GT 4x4 project. These were less than half the price of the EXACT model Discount Auto was going to sell me locally.These have a grease fitting on them, so make sure to pick up a grease gun, and some grease to fill these things up. Just rent a press at your local automotive shop (should be around a hundred dollars) and press the old ones out, and press these in. I would recommend taking some sand paper to the inside of your control arm once the old ball joints are out, as well as putting some anti-seize on the mating surface before pressing the new ones in. The anti-seize will make this job a lot easier if you need to do it again.

Does the job and fit my 95 Mustang GT convertible.

Removal of the steering knuckle on my mustang needed a torch. Ended up taking to a professional. They used this one and I am glad because it is the best quality. Buy the part take it to a mechanic. Don't waste your time trying it yourself.

Bought to replace my 26 year old ball joints. And used these on my v6 mustang in the past. So putting them on my 94 Gt was a good idea, quality is there and for the price it's a steal.

Ordered new was sent open boxes . Hope the are the correct ones.

Product good needs to be packed better during shipping

Purchased these ball joints to replace the lowers on my 2003 Mustang. All of the ones in the auto stores were more expensive and not Moog. I have always had great luck with Moog and these were no different. I have tried a few other brands over the years, but always wind up going back to Moog after the others begin failing in a short period of time.