Power-Pole Pushfit Straight Connector 1/4" Tubing

Q: does theis work with an old Blade Power pole

No, This fitting WILL NOT work with the BLADE model Power Pole. All model year 2012-2017 BLADE models use a 5/16 diameter poly hose. The Push fitting in question will only fit pre-2012 Power Pole units. Power Pole does not have a part number for a 5/16 push-fit style fitting. When Power Pole went to the 5/16 lines they also revised the fittings to a compression style fitting which we do carry and sell. If you have any questions or need further assistance, please feel free to contact me via email or phone 954-917-0634

Q: Do these attach the hoses to the pump assembly?

Power Pole has utilized 4 different generation pump systems. Only the Stealth Pump system used these 1/4 pushfit fittings with 1/4 hoses. The Stealth Pump system used (2) 90* 1/4 pushfit fittings located in the Power Pole cylinder. The early Stealth pumps came with (2) 1/4 pushfit straight fittings and mid year they were changed to 90* which made it easier to route the houses through the boat and into the pump. If the pump you have is missing the fittings I would suggest checking the cylinder to make sure your system uses the 1/4 pushfits. Following the Stealth pump system was the C-Monster1.0 pump system. This system used 5/16 brass compression fittings and 5/16 hoses. These 5/16 compression fittings are located in the same places previously discussed. Check to see which you need. Rich @ Hydrilla Gear 954-917-0634