FLYPROFiber- 10M/33ft OS2 LC to LC Fiber Patch Cable | Length Options: 0.2m-300m, 1G/10GB Single Mode Duplex, 9/125um SMF Fiber Optic Cable Cord LSZH 10Meter(33ft)

FLYPROFiber- 10M/33ft OS2 LC to LC Fiber Patch Cable | Length Options: 0.2m-300m, 1G/10GB Single Mode Duplex, 9/125um SMF Fiber Optic Cable Cord LSZH 10Meter(33ft)

Q: Is this cable resistent to water ingress (if installed outdoors in conduit?

Well in principle should be resistant to regular water (e.g. some rain water, nothing potential corrosive e.g. sewage water etc.). There are no electric parts in it, so water cannot create shortages. It is rated from -20°C to +70°C. If run in a conduit and it is rarely/occasionally exposed to water, I wouldn't worry at all. However, it is not an outdoor rated cable that can be permanently exposed to direct sun, used under water, or buried in the garden.

Q: Can this be used replace the google multi-gig fiber cable from the wall jack to the router? i'm looking to move the router to another room.

As long as you have SFP port it will work or check your female port if this cable will connect correctly

Q: does this work with? as i need it for a Ubiquiti Networks EdgeSwitch 24 250W (ES-24-250W) https://a.co/d/6adtLPL

If you want to use this jumper with this device, you will need to use it with a multimode optical module

Q: is it plastic fiber optic? is that I need to install some pipes throughout the house and there are many curves.

According to a specification I saw on their website, it says "Owens-Corning" so it would definitely be glass, but the manufacturer also says it is "bend insensitive" and that the "minimum bend radius" is 7.5mm (which is rather a tight bend radius IMHO). "Bend sensitive" would make the minimum bend radius to be about 15X the outside cable diameter (NOT to be confused with the diameter of the very tiny glass fiber inside the multi-layered construction found in this type of fiber optic cable). "Bend insensitive" has much to do with the interior construction layers of the fiber optic cable which then 'reinforces' the glass fiber to prevent damage in places where it is possibly tightly bent around corners or when pulling into conduit or through conduit fixtures. Just an "FYI": as a "rule of thumb" 7.5 mm is pretty darned close to the diameter of an 'old fashioned' graphite (* AKA "lead" *) pencil, if memory serves.

4.7/5

产品编号: 271509851

安全交易

细节

Brand
FLYPROFiber
Connector Type
Lc to Lc
Cable Type
Fiber Optic
Compatible Devices
PC Television
Special Feature
High Speed

🌐High Return Loss

📡10M length

🔌Low Insertion Loss

经常一起购买

FLYPROFiber- 10M/33ft OS2 LC to LC Fiber Patch Cable | Length Options: 0.2m-300m, 1G/10GB Single Mode Duplex, 9/125um SMF Fiber Optic Cable Cord LSZH 10Meter(33ft)

FLYPROFiber- LC to LC Fiber Patch Cable OM3 10M/33ft, Length Options: 0.2m-200m, 10GB/40GB Multimode Duplex, 50/125um Fiber Optic Cable Cord LSZH-10Meter(33ft)

H!Fiber 1.25G Single Mode SFP LC Module, 1000Base-LX/LH Fiber Transceiver for Cisco GLC-LH-SMD, Meraki, Ubiquit UniFi, TP-Link, Fortinet, Intel, Netgear, Mikrotik and More (SMF,1310nm,20km,DDM) 2 Pack

描述

🚀 Elevate Your Connectivity Game!

DURABLE DESIGN - Crafted with Japan-imported zirconia powder ceramics for longevity.
HIGH PERFORMANCE - Insertion Loss ≤ 0.3dB ensures optimal signal integrity.
UNMATCHED FLEXIBILITY - 16mm Minimum Bend Radius for superior adaptability.
TEMPERATURE RESILIENCE - Operates efficiently from -20ºC to +70ºC.
VERSATILE COMPATIBILITY - Works seamlessly with all standard fiber optic equipment.

The FLYPROFiber 10M OS2 LC to LC Fiber Patch Cable is engineered for high-performance networking, featuring a minimum bend radius of 16mm, low insertion loss, and high return loss. Designed for indoor use, it operates efficiently across a wide temperature range and is compatible with all standard fiber optic equipment, making it ideal for data centers and high-density installations.