FUNSHOWCASE Beads Resin Molds with Hole for Gemstone Cabochon Jewelry Casting 14-Count

FUNSHOWCASE Beads Resin Molds with Hole for Gemstone Cabochon Jewelry Casting 14-Count

Q: What is the diameter of the round beads?

Hello, for small round bead diameter is around 1.5cm (0.5inch), for larger round bead diameter is around 1.9cm (0.7inch). Please check the third photo displayed for detail size of our sphere silicone mold.

Q: How can I fill this so that the top doesn't have a ring around the bead?

Hi there, Thanks for your messages. Maybe you can choose the other mold without a ring hole, thanks for your understanding. Sincerely FUNSHOWCASE

Q: Can these be used with polymer clay and be baked in the oven?

I think these molds can stand the heat, but getting the clay into them might be difficult. Also, I've learned from experience that if you bake (cure) the clay inside of the molds, you will need to cure the clay for a longer period of time because the silicon absorbs a lot of heat and will keep the clay from fully curing. You should do these two things to ensure of proper cure: 1. Increase the baking temperature by a few degrees (no less than 5) 2. Bake for a longer period of time (add an additional 10-15 minutes. Remember to cover/tent your beads to keep them from burning and let them cool before trying to remove them from the mold. If they are difficult to pop out of the molds after curing, try a little soapy water and they should pop right out. Hope this helps.

Q: Would these beads thread on standard thickness (medium weight) yarn?

It should be able to. The holes aren’t tiny and seem to have pretty decent width. Though if you’re going to use yarn, I suggest making sure the part of the hard you will be “threading” with is sturdy. Maybe twist it tightly and put glue ar the end to harden it a bit.

4.4/5

产品编号: 370319935

安全交易

细节

Material
Silicone
Colour
Multicolor
Brand
FUNSHOWCASE
Shape
Cube
Number of pieces
14

经常一起购买

Beads Resin Molds with Hole for Gemstone Cabochon Jewelry Casting 14-Count

Suhome Resin Bead Molds for Jewelry 12 PCS Resin Molds Silicone with Hole Cabochon Gem Jewelry Making Epoxy Resin Molds for Earrings, Pendants,Bracelets and Necklaces

描述

Mainly use with uv resin, resin epoxy, liquid clay, plaster, polymer clay, or soap ( recommend use softer type of clays or press clay before use for easy casting, and you can always mix types of materials )
Clear crystal beads silicone mold ( smooth finish ) for Jewelry casting. Make varied of resin jewelry accessories, such as keychain, pendant, charms, pendant, bracelet, bangle, earrings, hair sticks, hair accessory, fan tassel accessory, barrette etc.
Resin starter kit. For resin casting ( especially resin epoxy casting ) , you might be unable to fill full of resin at one time, wait the first layer harder and fill again the top, then clean the extra with q-tip. If make more then dozen of resin epoxy beads, purchase more silicone molds to make in one time, and ensure a fast process.
You may use with varied food and non food materials if use wisely. You can observe the manufacturing process clearly through these transparent bead mold.
6 types of geometric beads: cube, diamond cube, faceted double cone, ellipse, rondelle, sphere ball. Types beads with 2 different sizes, sphere and cube with 3 different sizes. Make varied beads around 0.3-0.7inch, 14 molds in set.

6 types beads: cube, diamond cube, faceted double cone, ellipse, rondelle, sphere ball Types beads with 2 to 3 different sizes gloss finish clear color