关于我们

客户服务

客户支持

区域访问

法律与政策

社会的

获取应用程序

将相机对准即可下载应用程序

Customer support

We're available 24/7 to help you!

Usongshine Nema 17 Stepper Motor Bipolar Step Motor for Titan Extruder 3D Printer 4.1V 1A 13Ncm (18.4oz.in) 4 Lead 1.8 Deg with 1m Cable (17HS4023)

Q: Why does the rated voltage in the description say 3.6 volts but I see users saying it runs fine with 24 volts.

Because the motor draws its own maximum current when it's fed 3.6 volts, and all stepper drivers (the electronics controlling the stepper motors) are constant-current drivers, meaning that although they may be connected to a 12V source or a 24V source or a 36V source... they always limit the current to the stepper motor to whatever current they're set for (in this case ideally just about 1.0 amperes)... and the stepper drivers will deliver however much voltage to the stepper as is necessary to keep that current constant. This means that the drivers automatically compensate for wiring length and for speed-related inductive losses. Nobody actually runs any of these steppers at 24V. Ever.

Q: what are the actual dimensions in mm?

It’s a nema 17. That means it’s 1.7 inches by 1.7 inches, or 43.2 mm x 43.2 mm.

Q: What is the shaft diameter of this unit?

the Data sheet says 5mm. I am unable to measure it because it's currently being used.

Q: I'm having trouble getting the right MV settings. I had it at one point but it was turning too slowly - at 12mv it's just stuttering

The ones I have work great with no issue, although I did have to swap some wires because of the bipolarity. So, two things: Make sure you set the proper vRef on your stepper driver for your motor. (This maybe different then what it was originally set to), Make sure the motors are the same bipolarity as the ones you replaced, i.e. (A, A\, B, B\). The motors you just purchased will come with a data card compare them to the data on your old ones. Hopefully this helps.

4.4/5

产品编号: 462228036

安全交易

细节

Brand
Usongshine
Voltage
4.1 Volts
Product Dimensions
1.65"W x
Material
Aluminum
Item Weight
5.61 Ounces

经常一起购买

Usongshine Nema 17 Stepper Motor Bipolar Step Motor for Titan Extruder 3D Printer 4.1V 1A 13Ncm (18.4oz.in) 4 Lead 1.8 Deg with 1m Cable (17HS4023)

12V 5A Power Supply 5 Amp AC/DC Adapter Converter Transformer 100-240v, 50/60HZ, 5.5x2.5mm DC Output Jack, for LED Light Strips, Security Camera System, CCTV, Routers

BIGTREETECH TMC2209 V1.3 UART Stepper Motor Driver Module VS TMC2100 TMC2130 for Octopus V1.1/Octopus Pro/SKR V1.4 Turbo/SKR 3/Manta M8P/M4P/M5P 3D Printer Controller Board 1Pc

描述

Usongshine Nema 17 Stepper Motor Bipolar Step Motor for Titan Extruder 3D Printer 4.1V 1A 13Ncm (18.4oz.in) 4 Lead 1.8 Deg with 1m Cable (17HS4023)

有问题吗？看看别人问了什么

Why does the rated voltage in the description say 3.6 volts but I see users saying it runs fine with 24 volts.

what are the actual dimensions in mm?

What is the shaft diameter of this unit?

I'm having trouble getting the right MV settings. I had it at one point but it was turning too slowly - at 12mv it's just stuttering

常见问题

TrustPilot

TrustScore 4.5 | 7,300多个评论

法蒂玛 A.

我尝试过的最好的国际运输。物有所值！

3天前

Rajesh P.

当我对产品有疑问时，客户服务非常出色。

2天前

查看所有TrustPiLot评论

全球购物，通过 Desertcart 享受优惠

物有所值

各种产品的价格具有竞争力

全球购物

为 200 多个国家/地区的 3 亿多购物者提供服务

增强保护

深受全球购物者喜爱的值得信赖的支付方式

客户保证

深受全球购物者喜爱的值得信赖的支付方式。

沙漠车应用程序

随时随地随时随地购物。

HK$305

关税和税费包括

Hong Kong店铺

免费退货

30天对于 PRO 会员用户

15天无会员资格

安全交易

TrustPilot

TrustScore 4.5 | 7,300多个评论

Neha S.

整个订购过程中沟通顺畅。产品完美。

2 周前

阿里·H.

发货快，包装精良。Leatherman 工具手感非常高档和坚固。

1天前

查看所有TrustPiLot评论