Tapes Master 1" x 36 Yds 1 Mil Kapton Tape - Polyimide High Temperature Heat Rresistant Tape with Silicone Adhesive - No Residue

We recently build a small concrete bridge for the FDOT. They designed the railings as heavy treated timber with stainless connector gussets but wanted to save some money on the bolts, so they went galvanized. Actually it saved them around $20,000 on the difference between 1'' diameter stainless bolts and galvanized. Easy to do with a 1'' x 15'' SS timber bolt costing $160 each.Their spec was to use 2 mil polyimide tape to separate any galvanize from stainless to prevent galvanic corrosion.

I use it for protection of circuit boards, and insulating contacts on 18650 battery packs I build.It sticks very well, it's robust, so it doesn't puncture or tear like other polyamide tapes.I've used it for 3d printing, sublimation printing, and other things.Just all around great tape!As an aside, I usually tear it with my mouth. I'm not going to say it has a pleasing flavor, but if you've tasted some of the other poly tapes? They'll make you gag!This one doesn't really bother me.just an FYI!

i taped up 2 roval cl50 rims with vittoria corsa pro tires, 30mm. Removed Roval tape because of valve leaks. Retaped with 1in tape master tape. wrapped 2x. becareful to work tape slowly around rim to prevent tape from folding over. punctured tape with tubeless valve stem and finger tightened valve to rim. Be sure to ride a few times to let sealant get into the cotton casing. It will lose air for a few days. Mine stopped leaking air after 3 days of riding. i checked for air seapage by spraying soapy water onto sidewall. best cost effective alternative to name brand tubeless tape. no leaks after 200 miles.

Needed rim tape. For my tubeless Mt Bike. Someone recommended this. Worked perfect. Enough product to do several sets. For less the than price to do one set.You do need to press on tape. After applying. I used the handle of a screwdriver. To make sure the tape is adhered very well to the rim.It’s been a couple of months. Used orange seal sealant. Still holding air well.

Used for a tubeless tape job... not as thick as most for add a wrap or 2 or 3 as needed ... still holding up great on some road tires

I use this Mylar tape to put inside the scope rings to prevent scope damage.Pr's have used this for years,I just found that out last year.This is 1 inch and still use it but prefer 1/2 in take for scope rings.Less to trim.

Justo el producto que quería comprar, lo recomiendo

I had a GPU that needed a reflow... sure you can oven bake it like a cave man, or use a heat gun like a pro, but you always want to keep things safe and neat and work where you want to work at. The tape came on and off with no issues and protected the rest of the GPU from an unwanted or un-needed heat from the heat gun. No residue was left after removal and I have to recommend this to anyone that is needing to either de-solder or apply heat to components of electrical basis/matter.