Nitze Cage for Insta360 Ace/Ace Pro Action Camera with 52mm Filter Adapter Ring - T-IN02A

Overall I like the cage and it fits well with one exception. When you put the filter ring on the front of it is tightened all the way the Ace won’t actually go all the way into the cage and you can’t close the door all the way. You have to loosen the mounting screws so it can go all the way in. It also works the same in reverse. If the screws are tight when you open the door the camera won’t be able to be removed. You have to loosen the screws to get enough slack on the filter bracket so the lens will clear it and then you can remove the camera. For me this is minor and not a big deal except to make sure I don’t loose the Allen wrench for the screws!

Absolutely love the cage. Fantastic. While I haven't done any drop texts, I feel this would protect the sides of the camera pretty darn good. The rear screen is another story, however, and remains unprotected by the case, especially if it is flipped up, so a screen protector for the glass is also recommended in addition to this cage.THE ONLY DOWNSIDE FOR ME: The fact that in order to install a 52mm lens, you have to semi-permanently install two hex screws to the frame to hold the threaded lens base in place, which prevents you from quickly being able to remove the camera from the cage, rending the quick release utterly useless, IF the threaded lens base is installed. I hope to see future versions with both a quick release for the camera cage, AS WELL for a the threaded lens base, too.

Works for me. My insta360 ace pro works just fine with this cage. Allows me to use different mount without issues. Plenty of room unlike other cages which doesn't offer enough room for magnetic mounts. Filter lens is good but don't need it for my needs. Price is in the good range as well.

If you are buying the cage to use the filter attachment there are compromises you will have to make.VignettingYou can’t use the wind protection for the microphoneDifficulty in locking the cage unless you loosen the screws for the filter attachment.The cage itself is good but I would not use the filter attachment.

Works great, better form factor

I dropped my camera with this case and unfortunately case didn't do it's job

The media could not be loaded. This cage is solid. The whole thing is built with aluminum alloy. The ace pro is fully protected in almost every angle from dropping if you put on the filter ring. However, if you put on the filter ring, you cannot remove ace pro. Overall, this is a solid cage in my opinion. Definitely recommended it if you are looking for a solid cage for you ace pro

Perfectly fits on my Ace Pro and the cold shoes help me mount accessories easily!