TIMBOOTECH Wireless Video Transmitter and Receiver with OLED Screen, 1080P 60FPS, 5.8GHz, 1000FT Range 0.06s Latency, Smart Channel, Up to 4 Receivers & Loop-Out HDMI Wireless System for Live Stream

This is the second type of this product I have purchased. The first product was a bit flimsy, the antennas separated from the device frequently. It worked occasionally but led me to think I was on the right track.I use the device to mirror the TV/Home Theater in my house to my patio. When hosting a party it will play music videos but is usually used during sporting events. The outdoor sound is provided from my AV Receiver as part of my home theater so the sound is synchronized much better!I bought the transmitter and two receivers - the second receiver to support an outdoor projector. The devices linked up easily and quickly. The display is very helpful in showing that the devices are on the same channel - making any kind of troubleshooting much easier. I've had the devices become unpaired once - so I disconnected everything to go through the pairing steps again. As I am getting ready to do this, I notice a small notice in the instructions about rebooting the device. This fixes my PC, why not try that first?! Boom - everything paired back up! This is much easier (hold the power button for 5 seconds, the display will change to Booting) that the complete installation set up process.Now, when entertaining for the SuperBowl, the sound and video are synchronized!

Original 1-Star Review – 11/17/24I had earlier ordered the slightly less-expensive Timbootech round transmitter with two receivers. Neither receiver would remain linked over a 50-foot distance with one wall between them. But an email from Timbootech assured me that this newer fancier model would handle the job.So, I bought this newer model. It was a disaster.1. Although it was better than the first model, this one’s link still dropped out occasionally.2. The link has a significant delay. If you can hear both ends, it sounds like a bad echo.3. After a link power-down, you must press a button on each end for 5 seconds to reboot it.4. After it’s on overnight, It badly screws up the operation of our Xfinity TV Box.5. After being on for several days, the little transmitter’s fan began to clatter VERY noisily.It’s time to try a different brand.Update – 12/12/24 - Updated to 4-Star ReviewThe company contacted me when they saw the review and graciously apologized. They stood behind their product and offered to refund my cost for the product.They also mentioned that they are developing a product with greater operating distance that will soon be ready for production, and they will contact me when it is ready.For that superior customer service, they deserve a better review.

I recently purchased the Aimbo Wireless HDMIVideo Transmitter, and I couldn't be happier with its performance. I use it to transmit my 16-channel closed-circuit surveillance video to other rooms in my house, and it works flawlessly.One of the standout features is that the transmitter and receiver come already paired, making setup incredibly simple. The transmitter also has an HDMI in-and-out connection, which adds versatility. I also appreciate the various power options, from battery-powered to other sources, allowing for flexibility depending on the setup.Most importantly, the video connection is rock solid—no freezing, lag, or distortion in the display, which is crucial for surveillance purposes. I was also pleasantly surprised to find additional uses for the device in the manual that I hadn't initially considered, showing its adaptability for other applications.If you're looking for a reliable, easy-to-use, and high-performing wireless HDMI transmitter, I highly recommend Aimbo's product. It's a fantastic solution for transmitting video seamlessly and without compromise.

Simply didn't work. I trying to transmit the picture from my Sony A6400 to my Ipad Mini. Had to work through some errors with the channeling but finally got those synced. The ipad only showed a connection error message, 'No HDMI Signal'. I tried a few other output and input devices and nothing worked. I played with all the setting too, still nothing. Aka: JUNK!

The media could not be loaded. I recently bought a wireless video transmitter and receiver for our presentation room, and it has improved how we give a presentation.The synchronization between audio and video without noticeable delays has enhanced the professionalism of our presentations. Setting up this device was straightforward. I highly recommend it to anyone seeking a reliable screen mirroring solution.

Teaching automotive courses is difficult when the scan tool is tablet size as a large group can not view the data the scan tool is showing. This wireless transmitter is exactly what I needed. It can broadcast the tablet's display on a big screen TV while allowing the tablet to be mobile. Other methods had the tool tethered to the TV, and was a trip hazard. Screen mirroring did not work for us as the tablet uses blue tooth to connect to the vehicle. Only down side was that you need to purchase batteries separately.

Very frustrated reached out to company. They respond several times last time did not get a response. Very dissatisfied with product continues to go off and on line.

How it started: Hope it was a fluke. The TX unit booted only once. It is now stuck in booting... when powered on. Ordering another asap as we are in a bind. Wish us luck.How it's going: Unit performs as specified! Pretty good range, seems untroubled by wood, drywall, and human bodies. The multichannel scan is reassuring in a complex electronic environment where you can be sure you aren't the only one putting signal into the spectrum.A big plus is a large, clear display letting you know what is going on with the unit. Another is a solicitous vendor backing this unit who emailed me from the start.In this price range, this is a good bet. I do not know what long term reliability will be, but it does have a year long warranty.